Position display, function - GF27.19-P-5129-03RM
Transmission 722.6 in model 209.376 up to 31.05.03, 230.474, 211.076 up to 31.08.03
Shown on model 230.474
The position display in the instrument cluster (A1) is actuated by the ETC [ETC] control unit (N15/3) via the engine compartment CAN.
The program selection display in the instrument cluster (A1) is actuated by the electronic selector lever module control unit (N15/5) likewise via the engine compartment CAN.
The shift pattern display (87) is illuminated when the driving lights are switched on.
Program selection "W/S"
The program selection performed at the transmission mode switch (S16/5) remains stored after driving for approx. 1 minute and is then displayed again once the engine is started. The driving time required of approx. 1 minute is due to the system.
Program selection "M"
The program selection "M" (manual program) performed at the transmission mode switch (S16/5) does not remain stored. The standard program "S" is displayed once the engine is started again.