Rollover process function - GF91.60-P-2007SK
MODEL 171.4
Rollover process
In the event of a rollover, the restraint systems control unit (N2/7) evaluates the data of the following components:
- Integrated rollover sensor
- Drive sidebag sensor (A53)
- Front passenger sidebag sensor (A54)
- Driver-side frontal acceleration sensor (B48/1)
- Passenger-side frontal acceleration sensor (B48/2)
The following information is also evaluated for recording the situation in the vehicle interior:
Left front seat belt buckle status
If the driver seat belt buckle restraint systems switch (S68/3) registers that the belt latch is not inserted into the seat belt buckle, then the left front emergency tensioning retractor unit is not triggered.
Right front seat belt buckle status
If the front passenger seat belt buckle restraint systems switch (S68/4) detects that the belt latch is not inserted into the seat belt buckle, then the right front emergency tensioning retractor unit is not triggered.
The following squibs of the corresponding restraint devices can be actuated in the event of a rollover:
- Driver buckle emergency tensioning retractor squib (R46)
- Front passenger buckle emergency tensioning retractor squib (R46/1)
- driver sidebag squib (R12/9)
- front passenger sidebag squib (R12/10)
| Buckle emergency tensioning retractor, location/task | GF91.40-P-1600SK |
| Driver/front passenger sidebag, location/task/ design/function | GF91.60-P-4004SK |
| Seat belt buckle switch, location/task | GF91.60-P-4013SK |
| Sidebag sensor, location/task | GF91.60-P-4016SK |
| Supplemental restraint systems control unit, location/task/design | GF91.60-P-4018SK |
| Driver-side frontal acceleration sensor/front passenger-side, location/design | GF91.60-P-4020SK |