Control valve pressure, function - GF27.60-P-3017GGA

TRANSMISSION 722.902 in MODEL 463.306/336/346 up to 31.5.12 as of Model Year 2011/YoM 10 

TRANSMISSION 722.904 in MODEL 463.202/222/236/237 up to 31.5.12 as of Model Year 2009/YoM 08 

TRANSMISSION 722.902 in MODEL 463.303/340/341 up to 31.5.12 as of Model Year 2009/YoM 08 

Function requirements for control valve pressure, general 

• Circuit 87 ON
• Circuit 61 ON

Control valve pressure, general 

The control valve supply pressure is drawn from the working pressure and is limited to a maximum pressure of P = 8 bar.

2 supply pressure regulating valves are used.

• Supply pressure 1 regulating valve 
• Supply pressure 2 regulating valve 

Supply pressure 1 regulating valve 

Supply pressure regulating valve 1 supplies the following control solenoid valves:

• Working pressure control solenoid valve (VGS) (Y3/8y1)
• K2 clutch control solenoid valve (VGS) (Y3/8y3)
• B2 brake control solenoid valve (VGS) (Y3/8y6)
• Torque converter lockup clutch control solenoid valve (VGS) (Y3/8y8)

Supply pressure 2 regulating valve 

Supply pressure regulating valve 2 supplies the following control solenoid valves:

• K1 clutch control solenoid valve (VGS) (Y3/8y2)
• K3 clutch control solenoid valve (VGS) (Y3/8y4)
• B1 brake control solenoid valve (VGS) (Y3/8y5)
• B3 brake control solenoid valve (VGS) (Y3/8y7)

By using two supply pressure regulating valves, the control solenoid valve groups are isolated from each other and the control solenoid valve groups do not influence each other during any shift operation.