LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mercedes Benz >> 2012 >> ML350 BlueTEC >> Repair and Diagnosis >> Quick Lookups >> Technical Bulletins >> Campaigns >> System >> Update The Selective Catalytic Reduction (SCR) Control Module Software (2012110006)
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Update The Selective Catalytic Reduction (SCR) Control Module Software (2012110006)

Publication date: 2012-12-07
Reference number: 2012110006

UPDATE THE SELECTIVE CATALYTIC REDUCTION (SCR) CONTROL MODULE SOFTWARE

UPDATE THE SELECTIVE CATALYTIC REDUCTION (SCR) CONTROL MODULE SOFTWARE

SERVICE CAMPAIGN BULLETIN

Reference Number(s): 2012110006, Date of Issue:  December 7, 2012
MERCEDES-BENZ: Model 166, Model Year 2012

SUBJECT

Model 166, Model Year 2012 

Update the Selective Catalytic Reduction (SCR) Control Module Software 

This Service Campaign has been initiated because Daimler AG (DAG), the manufacturer of Mercedes-Benz vehicles, has determined that the SCR Control Module Software may not meet current specifications in the subject vehicles. This software update will correct a condition of a low level indicator when sufficient AdBlue remains in the tank. Dealers will update the SCR Control Module Software at the next workshop visit.

Prior to performing this Service Campaign:

Please note that Recall and Service Campaigns do not expire  and may also be performed on a vehicle with a vehicle status indicator.

Approximately 3,100 vehicles are affected.

PROCEDURE

NOTE:
  • Use DAS/Xentry 09/12 or higher.
  • Follow the steps exactly as described in DAS/Xentry.
  • Connect battery charger.
  1. Connect Star Diagnosis to vehicle.
  2. Control units / SCR / Control unit adaptations / Control unit programming.
  3. Follow on-screen instructions.
NOTE: After flashing the new software might be 6429026601 (code) and 6429033304 (data).
NOTE: The following allowable labor operation should be used when submitting a warranty claim for this repair:

WARRANTY INFORMATION

Operation:

  1. Connect/disconnect battery charger (02-5058)
  2. Star Diagnosis System (SDS), Connect/disconnect (02-4762)
  3. Update software in SCR control unit (02-7915).
WARRANTY INFORMATION

Damage Code Operation Number Model Indicator(s)
54 981 42 8 02-5058 1B, 2A
02-4762
02-7915
NOTE: Operation code times are subject to change. Please refer to StarTime for current labor times.