Remove/Install Intake Manifold Pressure Sensor - Ar07.04-D-0100SD

ENGINE 642, 646, 651 in MODEL 906 

Fig 1: Intake Manifold Pressure Sensor Remove/Install Component Locations

Courtesy of MERCEDES-BENZ USA

	Remove/install
1	Disconnect electrical connector (1) from intake manifold pressure sensor (B28, B28/17 or B28/19)
2	Unscrew bolts from intake manifold pressure sensor (B28, B28/17 or B28/19)
3	Pull intake manifold pressure sensor (B28, B28/17 or B28/19) out of air filter housing (2)	Installation:  Inspect O-ring, install new ring if necessary.
4	Install in the reverse order