Remove/Install Tire Pressure Monitoring Control Unit - Ar40.15-D-0101M
Model 906
with code XM0 (Facelift)
| Information on preventing damage to electronic components due to electrostatic discharge | AH54.00-P-0001-01A | ||
| Remove/install | |||
| 1 |
Perform initial startup of control unit (1) | If control unit (1) is replaced. |
AD00.00-D-2000-04SD |
| 2 | Remove the transmitter key from electronic ignition lock (EZS) control unit | ||
| 3 | Disconnect electrical connection (2) | ||
| 4 | Loosen retaining clips (3) and remove control unit (1) | ||
| 5 | Install in the reverse order |