Service Campaign 2014060003 - SCN Code The Engine Control Module (2014060003)

Publication date: 2014-06-20
Reference number: 2014060003

SERVICE CAMPAIGN 2014060003 - SCN CODE THE ENGINE CONTROL MODULE

SERVICE CAMPAIGN BULLETIN

Reference Number(s): 2014060003, Date of Issue: June 2014

MERCEDES-BENZ:

Models 166, X166, Model Year 2014

SUBJECT

Models 166, X166, Model Year 2014

SCN code the Engine Control Module

This Service Campaign has been initiated because Daimler AG (DAG), the manufacturer of Mercedes-Benz vehicles, has determined that an SCN coding to the engine control module will optimize the transmission shift quality. An authorized Mercedes-Benz dealer will SCN code the engine control module at the next workshop visit..

Prior to performing this Service Campaign:

Please check VMI to determine if the vehicle is involved in the Campaign and if it has been previously repaired.
Please review the entire Service Campaign bulletin and follow the repair procedure exactly as described.

Approximately 7,507 vehicles are affected.

PROCEDURE

NOTE:

Use DAS/Xentry 05-06/14 with all associated patches or higher.
Follow the steps exactly as described in DAS/Xentry.
Connect battery charger (battery voltage >12.5V).
Ensure all electrical consumers are switched-off.
In the event of software/SCN update issues, contact Star Diagnosis User Help Desk. Please refer to the "pre-call" check list before contacting UHD
Refer to Star Diagnosis System (SDS) Best Practices Guide.

Perform SCN coding of motor electronics:
ME - Motor Electronics 'MED177' for combustion engine 'M278' -> Adaptations ->Configuration -> SCN -> SCN coding.
Follow on-screen instructions.
NOTE: The following allowable labor operation should be used when submitting a warranty claim for this repair:

WARRANTY INFORMATION

Operation

Connect/disconnect battery charger (02-5058)
Star Diagnosis System (SDS), Connect/disconnect (02-4762)
Perform SCN coding in engine control module (02-8570)

WARRANTY INFORMATION

Damage Code	Operation Number	Labor Time (hrs.)
54 982 48 8	02-5058	0.1
	02-4762	0.1
	02-8570	0.1

NOTE: Operation Number labor times are subject to change.