LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mercedes Benz >> 2015 >> CLS400 Base >> Repair and Diagnosis >> General Information >> Reset Procedures >> Tire Pressure Monitor Systems >> TPMS Reset Procedures >> Tire Pressure Monitor System Reactivation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Tire Pressure Monitor System Reactivation

CAUTION: The warning system can only operate in a reliable manner if correct tire pressures are set. If an incorrect tire inflation pressure is set, the system will monitor the pressure according to the incorrect value.
NOTE: TPMS activation is accomplished by using the multifunction display control buttons on left side of steering wheel.
  1. Turn ignition switch to OFF position.
  2. Ensure inflation pressure of all 4 tires is set to specification.
  3. Make sure that the SmartKey is in position 2 in the ignition lock.
  4. Press the left or right arrow button to select the "Serv." menu.
  5. Press the up or down arrow button to select the "Tire Pressure".
  6. Press the "OK" button. The multifunction display shows the current tire pressure of the individual tires, or the message "Tire pressure will be displayed after driving a few minutes".
  7. Press the down arrow button. The message "Use Current Pressures as New Reference Values" will appear.
  8. Press the "OK" button. The message "Tire Press. Monitor Restarted" will appear.
  9. After about 10 minutes driving time the current tire pressures are displayed. The activation process is complete.
scientia non olet · About LEMON Manuals