Engine Control DTCS
ENGINE CONTROLS DTCS (ME17.7.8 ENGINE 277)
| MB DTC | Generic DTC | Description |
| B002000 | - | This error code can be ignored and erased. |
| B10E800 | - | This error code can be ignored and erased. |
| B10E900 | - | This error code can be ignored and erased. |
| B10EC00 | - | This error code can be ignored and erased. |
| B10EC01 | - | This error code can be ignored and erased. |
| B110900 | - | This error code can be ignored and erased. |
| B110A00 | - | This error code can be ignored and erased. |
| B1CE812 | - | The digital output for the crash signal has a malfunction. There is a short circuit to positive. |
| B218E00 | - | This error code can be ignored and erased. |
| B218E04 | - | This error code can be ignored and erased. |
| B218E11 | - | This error code can be ignored and erased. |
| B218E12 | - | This error code can be ignored and erased. |
| B218E13 | - | This error code can be ignored and erased. |
| B218E48 | - | This error code can be ignored and erased. |
| C000100 | - | This error code can be ignored and erased. |
| C000200 | - | This error code can be ignored and erased. |
| C000300 | - | This error code can be ignored and erased. |
| C000400 | - | This error code can be ignored and erased. |
| C001000 | - | This error code can be ignored and erased. |
| C001100 | - | This error code can be ignored and erased. |
| C001200 | - | This error code can be ignored and erased. |
| C001400 | - | This error code can be ignored and erased. |
| C001500 | - | This error code can be ignored and erased. |
| C001600 | - | This error code can be ignored and erased. |
| C001800 | - | This error code can be ignored and erased. |
| C001900 | - | This error code can be ignored and erased. |
| C001A00 | - | This error code can be ignored and erased. |
| C001C00 | - | This error code can be ignored and erased. |
| C001D00 | - | This error code can be ignored and erased. |
| C001E00 | - | This error code can be ignored and erased. |
| C002000 | - | This error code can be ignored and erased. |
| C002100 | - | This error code can be ignored and erased. |
| C002200 | - | This error code can be ignored and erased. |
| C003000 | - | This error code can be ignored and erased. |
| C003100 | - | This error code can be ignored and erased. |
| C003108 | - | The left front wheel speed sensor has a malfunction. There is a signal fault or the message is faulty. |
| C003200 | - | This error code can be ignored and erased. |
| C003300 | - | This error code can be ignored and erased. |
| C003400 | - | This error code can be ignored and erased. |
| C003408 | - | The right front wheel speed sensor has a malfunction. There is a signal fault or the message is faulty. |
| C003500 | - | This error code can be ignored and erased. |
| C003600 | - | This error code can be ignored and erased. |
| C003700 | - | This error code can be ignored and erased. |
| C003708 | - | The left rear wheel speed sensor has a malfunction. There is a signal fault or the message is faulty. |
| C003800 | - | This error code can be ignored and erased. |
| C003900 | - | This error code can be ignored and erased. |
| C003A00 | - | This error code can be ignored and erased. |
| C003A08 | - | The right rear wheel speed sensor has a malfunction. There is a signal fault or the message is faulty. |
| C003B00 | - | This error code can be ignored and erased. |
| C004200 | - | This error code can be ignored and erased. |
| C004600 | - | This error code can be ignored and erased. |
| C004800 | - | This error code can be ignored and erased. |
| C006A00 | - | This error code can be ignored and erased. |
| C109000 | - | This error code can be ignored and erased. |
| C120200 | - | This error code can be ignored and erased. |
| C120300 | - | This error code can be ignored and erased. |
| C123300 | - | This error code can be ignored and erased. |
| C123600 | - | This error code can be ignored and erased. |
| C125000 | - | This error code can be ignored and erased. |
| C125200 | - | This error code can be ignored and erased. |
| C125400 | - | This error code can be ignored and erased. |
| C126000 | - | This error code can be ignored and erased. |
| C127000 | - | This error code can be ignored and erased. |
| C128100 | - | This error code can be ignored and erased. |
| C128200 | - | This error code can be ignored and erased. |
| C182500 | - | This error code can be ignored and erased. |
| C186500 | - | This error code can be ignored and erased. |
| C190800 | - | This error code can be ignored and erased. |
| C191000 | - | This error code can be ignored and erased. |
| C193300 | - | This error code can be ignored and erased. |
| C193400 | - | This error code can be ignored and erased. |
| C196500 | - | This error code can be ignored and erased. |
| C196700 | - | This error code can be ignored and erased. |
| C197500 | - | This error code can be ignored and erased. |
| C197600 | - | This error code can be ignored and erased. |
| C200100 | - | This error code can be ignored and erased. |
| C200200 | - | This error code can be ignored and erased. |
| C212B00 | - | This error code can be ignored and erased. |
| P000000 | - | This error code can be ignored and erased. |
| P000100 | - | This error code can be ignored and erased. |
| P000300 | - | This error code can be ignored and erased. |
| P000400 | - | This error code can be ignored and erased. |
| P000801 | - | The position of the crankshaft (cylinder bank 1) is implausible. There is a general electrical fault. |
| P000903 | - | The position of the crankshaft (cylinder bank 2) is implausible. There is a frequency or pulse width modulation fault. |
| P000E00 | - | This error code can be ignored and erased. |
| P001664 | - | The position of the intake camshaft (cylinder bank 1) is implausible relative to the position of the crankshaft. There is an implausible signal. |
| P001685 | - | The position of the intake camshaft (cylinder bank 1) is implausible relative to the position of the crankshaft. There is a signal above the permissible limit value. |
| P003000 | - | The output for the heater of oxygen sensor 1 (cylinder bank 1) has an electrical fault or open circuit. |
| P003100 | - | The output for the heater of oxygen sensor 1 (cylinder bank 1) has a short circuit to ground. |
| P003200 | - | The output for the heater of oxygen sensor 1 (cylinder bank 1) has a short circuit to positive. |
| P003300 | - | This error code can be ignored and erased. |
| P003400 | - | This error code can be ignored and erased. |
| P003500 | - | This error code can be ignored and erased. |
| P003600 | - | The output for the heater of oxygen sensor 2 (cylinder bank 1) has an electrical fault or open circuit. |
| P003700 | - | The output for the heater of oxygen sensor 2 (cylinder bank 1) has a short circuit to ground. |
| P003800 | - | The output for the heater of oxygen sensor 2 (cylinder bank 1) has a short circuit to positive. |
| P003973 | - | This error code can be ignored and erased. |
| P004000 | - | Oxygen sensors 1 (cylinder banks 1 and 2) have been swapped. |
| P004100 | - | Oxygen sensors 2 (cylinder banks 1 and 2) have been swapped. |
| P005000 | - | The output for the heater of oxygen sensor 1 (cylinder bank 2) has an electrical fault or an open circuit. |
| P005100 | - | The output for the heater of oxygen sensor 1 (cylinder bank 2) has a short circuit to ground. |
| P005200 | - | The output for the heater of oxygen sensor 1 (cylinder bank 2) has a short circuit to positive. |
| P005400 | - | The heater of oxygen sensor 2 (cylinder bank 1) has an implausible resistance value. |
| P005600 | - | The output for the heater of oxygen sensor 2 (cylinder bank 2) has an electrical fault or an open circuit. |
| P005700 | - | The output for the heater of oxygen sensor 2 (cylinder bank 2) has a short circuit to ground. |
| P005800 | - | The output for the heater of oxygen sensor 2 (cylinder bank 2) has a short circuit to positive. |
| P006000 | - | The heater of oxygen sensor 2 (cylinder bank 2) has an implausible resistance value. |
| P006800 | - | This error code can be ignored and erased. |
| P007001 | - | This error code can be ignored and erased. |
| P007062 | - | The outside temperature sensor has an electrical fault. The signal comparison is faulty. |
| P007064 | - | The outside temperature sensor has an electrical fault. There is an implausible signal. |
| P007101 | - | This error code can be ignored and erased. |
| P007126 | - | The outside temperature sensor has a malfunction. The signal change rate is below the permissible limit value. |
| P007127 | - | The outside temperature sensor has a malfunction. The signal change rate is above the permissible limit value. |
| P007128 | - | The outside temperature sensor has a malfunction. The signal offset is outside the permissible range. |
| P007200 | - | The outside temperature sensor has a short circuit to ground. |
| P007201 | - | This error code can be ignored and erased. |
| P007300 | - | The outside temperature sensor has a short circuit to positive. |
| P007301 | - | This error code can be ignored and erased. |
| P007B00 | - | The charge air temperature sensor (cylinder bank 1) has a malfunction. |
| P007B27 | - | The charge air temperature sensor (cylinder bank 1) has a malfunction. The signal change rate is above the permissible limit value. |
| P007B28 | - | The charge air temperature sensor (cylinder bank 1) has a malfunction. The signal offset is outside the permissible range. |
| P007C11 | - | The charge air temperature sensor (cylinder bank 1) has a short circuit to ground. There is a short circuit to ground. |
| P007D12 | - | The charge air temperature sensor (cylinder bank 1) has a short circuit to positive. There is a short circuit to positive. |
| P007E2A | - | The charge air temperature sensor (cylinder bank 1) has a sporadic malfunction. There is no signal change. |
| P008796 | - | The fuel pressure in the system is too low. There is an internal component fault. |
| P008900 | - | This error code can be ignored and erased. |
| P008A00 | - | The pressure in the fuel low pressure circuit is too low. |
| P008B00 | - | The pressure in the fuel low pressure circuit is too high. |
| P009664 | - | This error code can be ignored and erased. |
| P009684 | - | This error code can be ignored and erased. |
| P00C000 | - | This error code can be ignored and erased. |
| P00C100 | - | This error code can be ignored and erased. |
| P00C200 | - | This error code can be ignored and erased. |
| P00DF00 | - | The temperature sensor for the coolant of the charge air cooler has a malfunction. |
| P00DF28 | - | The temperature sensor for the coolant of the charge air cooler has a malfunction. The signal offset is outside the permissible range. |
| P00E000 | - | The temperature sensor for the coolant of the charge air cooler has a short circuit to ground. |
| P00E100 | - | The temperature sensor for the coolant of the charge air cooler has a short circuit to positive. |
| P010126 | - | This error code can be ignored and erased. |
| P010127 | - | This error code can be ignored and erased. |
| P010129 | - | This error code can be ignored and erased. |
| P010184 | - | This error code can be ignored and erased. |
| P010185 | - | This error code can be ignored and erased. |
| P010186 | - | This error code can be ignored and erased. |
| P010192 | - | This error code can be ignored and erased. |
| P010211 | - | This error code can be ignored and erased. |
| P010226 | - | This error code can be ignored and erased. |
| P010300 | - | This error code can be ignored and erased. |
| P010327 | - | This error code can be ignored and erased. |
| P010616 | - | The intake manifold pressure sensor has a malfunction. The limit value for electrical voltage has not been attained. |
| P010617 | - | The intake manifold pressure sensor has a malfunction. The limit value for electrical voltage has been exceeded. |
| P010628 | - | The intake manifold pressure sensor has a malfunction. The signal offset is outside the permissible range. |
| P010664 | - | The intake manifold pressure sensor has a malfunction. There is an implausible signal. |
| P010692 | - | The intake manifold pressure sensor has a malfunction. The function or the instruction is faulty. |
| P010693 | - | The intake manifold pressure sensor has a malfunction. There are no instructions. |
| P010694 | - | The intake manifold pressure sensor has a malfunction. There is an unexpected instruction. |
| P010711 | - | The intake manifold pressure sensor has a short circuit to ground. There is a short circuit to ground. |
| P010812 | - | The intake manifold pressure sensor has a short circuit to positive. There is a short circuit to positive. |
| P011100 | - | This error code can be ignored and erased. |
| P011500 | - | Coolant temperature sensor 1 has an electrical fault. |
| P011684 | - | Coolant temperature sensor 1 has a malfunction. There is a signal below the permissible limit value. |
| P011685 | - | Coolant temperature sensor 1 has a malfunction. There is a signal above the permissible limit value. |
| P011686 | - | This error code can be ignored and erased. |
| P011700 | - | Coolant temperature sensor 1 has a short circuit to ground. |
| P011800 | - | Coolant temperature sensor 1 has a short circuit to positive. |
| P011900 | - | Coolant temperature sensor 1 has a sporadic malfunction. |
| P012200 | - | Position sensor 1 for the throttle valve has a short circuit to ground. |
| P012300 | - | Position sensor 1 for the throttle valve has a short circuit to positive. |
| P012800 | - | The coolant temperature is below the coolant thermostat specified temperature. |
| P013011 | - | Oxygen sensor 1 (cylinder bank 1) has an electrical fault. There is a short circuit to ground. |
| P013012 | - | Oxygen sensor 1 (cylinder bank 1) has an electrical fault. There is a short circuit to positive. |
| P013084 | - | Oxygen sensor 1 (cylinder bank 1) has an electrical fault. There is a signal below the permissible limit value. |
| P013300 | - | Oxygen sensor 1 (cylinder bank 1) has a delayed reaction. |
| P013504 | - | The heater for oxygen sensor 1 (cylinder bank 1) has an electrical fault. There is an internal fault. |
| P013584 | - | The heater for oxygen sensor 1 (cylinder bank 1) has an electrical fault. There is a signal below the permissible limit value. |
| P013600 | - | Oxygen sensor 2 (cylinder bank 1) has an electrical fault. |
| P013700 | - | Oxygen sensor 2 (cylinder bank 1) has a short circuit to ground. |
| P013800 | - | Oxygen sensor 2 (cylinder bank 1) has a short circuit to positive. |
| P013A00 | - | The rich/lean switchover of oxygen sensor 2 (cylinder bank 1) is too slow. |
| P013B00 | - | The lean/rich switchover of oxygen sensor 2 (cylinder bank 1) is too slow. |
| P013C00 | - | The rich/lean switchover of oxygen sensor 2 (cylinder bank 2) is too slow. |
| P013D00 | - | The lean/rich switchover of oxygen sensor 2 (cylinder bank 2) is too slow. |
| P013E00 | - | The rich/lean switchover of oxygen sensor 2 (cylinder bank 1) is delayed. |
| P013F00 | - | The lean/rich switchover of oxygen sensor 2 (cylinder bank 1) is delayed. |
| P014526 | - | This error code can be ignored and erased. |
| P014527 | - | This error code can be ignored and erased. |
| P014A00 | - | The rich/lean switchover of oxygen sensor 2 (cylinder bank 2) is delayed. |
| P014B00 | - | The lean/rich switchover of oxygen sensor 2 (cylinder bank 2) is delayed. |
| P015011 | - | Oxygen sensor 1 (cylinder bank 2) has an electrical fault. There is a short circuit to ground. |
| P015012 | - | Oxygen sensor 1 (cylinder bank 2) has an electrical fault. There is a short circuit to positive. |
| P015084 | - | Oxygen sensor 1 (cylinder bank 2) has an electrical fault. There is a signal below the permissible limit value. |
| P015300 | - | Oxygen sensor 1 (cylinder bank 2) has a delayed reaction. |
| P015504 | - | The heater of oxygen sensor 1 (cylinder bank 2) has an electrical fault. There is an internal fault. |
| P015584 | - | The heater of oxygen sensor 1 (cylinder bank 2) has an electrical fault. There is a signal below the permissible limit value. |
| P015600 | - | Oxygen sensor 2 (cylinder bank 2) has an electrical fault. |
| P015700 | - | Oxygen sensor 2 (cylinder bank 2) has a short circuit to ground. |
| P015800 | - | Oxygen sensor 2 (cylinder bank 2) has a short circuit to positive. |
| P016526 | - | This error code can be ignored and erased. |
| P016527 | - | This error code can be ignored and erased. |
| P017004 | - | The mixture formation (cylinder bank 1) has a malfunction. There is an internal fault. |
| P017100 | - | The mixture (cylinder bank 1) is too lean. |
| P017184 | - | The mixture (cylinder bank 1) is too lean. There is a signal below the permissible limit value. |
| P017200 | - | The mixture (cylinder bank 1) is too rich. |
| P017285 | - | The mixture (cylinder bank 1) is too rich. There is a signal above the permissible limit value. |
| P017304 | - | The mixture formation (cylinder bank 2) has a malfunction. There is an internal fault. |
| P017400 | - | The mixture (cylinder bank 2) is too lean. |
| P017484 | - | The mixture (cylinder bank 2) is too lean. There is a signal below the permissible limit value. |
| P017500 | - | The mixture (cylinder bank 2) is too rich. |
| P017585 | - | The mixture (cylinder bank 2) is too rich. There is a signal above the permissible limit value. |
| P018127 | - | This error code can be ignored and erased. |
| P018128 | - | This error code can be ignored and erased. |
| P01812A | - | This error code can be ignored and erased. |
| P018211 | - | This error code can be ignored and erased. |
| P018312 | - | This error code can be ignored and erased. |
| P019627 | - | Engine oil temperature sensor 1 has a malfunction. The signal change rate is above the permissible limit value. |
| P01962A | - | Engine oil temperature sensor 1 has a malfunction. There is no signal change. |
| P019661 | - | This error code can be ignored and erased. |
| P019692 | - | Engine oil temperature sensor 1 has a malfunction. The function or the instruction is faulty. |
| P019711 | - | Engine oil temperature sensor 1 has a short circuit to ground. There is a short circuit to ground. |
| P019812 | - | Engine oil temperature sensor 1 has a short circuit to positive. There is a short circuit to positive. |
| P019A00 | - | This error code can be ignored and erased. |
| P019B00 | - | This error code can be ignored and erased. |
| P019C00 | - | This error code can be ignored and erased. |
| P019D00 | - | This error code can be ignored and erased. |
| P01AA00 | - | This error code can be ignored and erased. |
| P01AB00 | - | This error code can be ignored and erased. |
| P01AB53 | - | This error code can be ignored and erased. |
| P020100 | - | The fuel injector (cylinder 1) has an electrical fault or an open circuit. |
| P020200 | - | The fuel injector (cylinder 2) has an electrical fault or an open circuit. |
| P020300 | - | The fuel injector (cylinder 3) has an electrical fault or an open circuit. |
| P020400 | - | The fuel injector (cylinder 4) has an electrical fault or an open circuit. |
| P020500 | - | The fuel injector (cylinder 5) has an electrical fault or an open circuit. |
| P020600 | - | The fuel injector (cylinder 6) has an electrical fault or an open circuit. |
| P020700 | - | The fuel injector (cylinder 7) has an electrical fault or an open circuit. |
| P020800 | - | The fuel injector (cylinder 8) has an electrical fault or an open circuit. |
| P020900 | - | The fuel injector (cylinder 9) has an electrical fault or an open circuit. |
| P021000 | - | The fuel injector (cylinder 10) has an electrical fault or an open circuit. |
| P021100 | - | The fuel injector (cylinder 11) has an electrical fault or an open circuit. |
| P021200 | - | The fuel injector (cylinder 12) has an electrical fault or an open circuit. |
| P021700 | - | The coolant temperature of the engine is too high. |
| P021935 | - | The engine speed is too high. The on-time of the signal frequency is too long. |
| P022200 | - | Position sensor 2 for the throttle valve has a short circuit to ground. |
| P022300 | - | Position sensor 2 for the throttle valve has a short circuit to positive. |
| P023400 | - | The boost pressure of turbocharger 1 is too high. |
| P023616 | - | The boost pressure sensor has a malfunction. The limit value for electrical voltage has not been attained. |
| P023617 | - | The boost pressure sensor has a malfunction. The limit value for electrical voltage has been exceeded. |
| P023628 | - | The boost pressure sensor has a malfunction. The signal offset is outside the permissible range. |
| P023664 | - | The boost pressure sensor has a malfunction. There is an implausible signal. |
| P023711 | - | The boost pressure sensor has a short circuit to ground. There is a short circuit to ground. |
| P023812 | - | The boost pressure sensor has a short circuit to positive. There is a short circuit to positive. |
| P023A00 | - | Actuation ""Coolant pump of charge air cooler"" has an electrical fault or open circuit. |
| P023B00 | - | Actuation ""Coolant pump of charge air cooler"" has a short circuit to ground. |
| P023C00 | - | Actuation ""Coolant pump of charge air cooler"" has a short circuit to positive. |
| P024313 | - | The output for the low-pressure turbocharger has an electrical fault. There is an open circuit. |
| P024511 | - | The output for the low-pressure turbocharger has a short circuit to ground. There is a short circuit to ground. |
| P024612 | - | The output for the low-pressure turbocharger has a short circuit to positive. There is a short circuit to positive. |
| P024713 | - | This error code can be ignored and erased. |
| P024911 | - | This error code can be ignored and erased. |
| P025012 | - | This error code can be ignored and erased. |
| P026100 | - | The fuel injector (cylinder 1) has a short circuit to ground. |
| P026200 | - | The fuel injector (cylinder 1) has a short circuit to positive. |
| P026400 | - | The fuel injector (cylinder 2) has a short circuit to ground. |
| P026500 | - | The fuel injector (cylinder 2) has a short circuit to positive. |
| P026700 | - | The fuel injector (cylinder 3) has a short circuit to ground. |
| P026800 | - | The fuel injector (cylinder 3) has a short circuit to positive. |
| P026A00 | - | The efficiency of the charge air cooler is not sufficient. |
| P027000 | - | The fuel injector (cylinder 4) has a short circuit to ground. |
| P027100 | - | The fuel injector (cylinder 4) has a short circuit to positive. |
| P027300 | - | The fuel injector (cylinder 5) has a short circuit to ground. |
| P027400 | - | The fuel injector (cylinder 5) has a short circuit to positive. |
| P027600 | - | The fuel injector (cylinder 6) has a short circuit to ground. |
| P027700 | - | The fuel injector (cylinder 6) has a short circuit to positive. |
| P027900 | - | The fuel injector (cylinder 7) has a short circuit to ground. |
| P028000 | - | The fuel injector (cylinder 7) has a short circuit to positive. |
| P028200 | - | The fuel injector (cylinder 8) has a short circuit to ground. |
| P028300 | - | The fuel injector (cylinder 8) has a short circuit to positive. |
| P028500 | - | The fuel injector (cylinder 9) has a short circuit to ground. |
| P028600 | - | The fuel injector (cylinder 9) has a short circuit to positive. |
| P028800 | - | The fuel injector (cylinder 10) has a short circuit to ground. |
| P028900 | - | The fuel injector (cylinder 10) has a short circuit to positive. |
| P029100 | - | The fuel injector (cylinder 11) has a short circuit to ground. |
| P029200 | - | The fuel injector (cylinder 11) has a short circuit to positive. |
| P029400 | - | The fuel injector (cylinder 12) has a short circuit to ground. |
| P029500 | - | The fuel injector (cylinder 12) has a short circuit to positive. |
| P029900 | - | The boost pressure of turbocharger 1 is too low. |
| P030000 | - | Combustion misfiring has been detected. |
| P030084 | - | Combustion misfiring has been detected. There is a signal below the permissible limit value. |
| P030085 | - | Combustion misfiring has been detected. There is a signal above the permissible limit value. |
| P030100 | - | Combustion misfiring of cylinder 1 has been detected. |
| P030184 | - | Combustion misfiring of cylinder 1 has been detected. There is a signal below the permissible limit value. |
| P030185 | - | Combustion misfiring of cylinder 1 has been detected. There is a signal above the permissible limit value. |
| P030200 | - | Combustion misfiring of cylinder 2 has been detected. |
| P030284 | - | Combustion misfiring of cylinder 2 has been detected. There is a signal below the permissible limit value. |
| P030285 | - | Combustion misfiring of cylinder 2 has been detected. There is a signal above the permissible limit value. |
| P030300 | - | Combustion misfiring of cylinder 3 has been detected. |
| P030384 | - | Combustion misfiring of cylinder 3 has been detected. There is a signal below the permissible limit value. |
| P030385 | - | Combustion misfiring of cylinder 3 has been detected. There is a signal above the permissible limit value. |
| P030400 | - | Combustion misfiring of cylinder 4 has been detected. |
| P030484 | - | Combustion misfiring of cylinder 4 has been detected. There is a signal below the permissible limit value. |
| P030485 | - | Combustion misfiring of cylinder 4 has been detected. There is a signal above the permissible limit value. |
| P030500 | - | Combustion misfiring of cylinder 5 has been detected. |
| P030584 | - | Combustion misfiring of cylinder 5 has been detected. There is a signal below the permissible limit value. |
| P030585 | - | Combustion misfiring of cylinder 5 has been detected. There is a signal above the permissible limit value. |
| P030600 | - | Combustion misfiring of cylinder 6 has been detected. |
| P030684 | - | Combustion misfiring of cylinder 6 has been detected. There is a signal below the permissible limit value. |
| P030685 | - | Combustion misfiring of cylinder 6 has been detected. There is a signal above the permissible limit value. |
| P030700 | - | Combustion misfiring of cylinder 7 has been detected. |
| P030784 | - | Combustion misfiring of cylinder 7 has been detected. There is a signal below the permissible limit value. |
| P030785 | - | Combustion misfiring of cylinder 7 has been detected. There is a signal above the permissible limit value. |
| P030800 | - | Combustion misfiring of cylinder 8 has been detected. |
| P030884 | - | Combustion misfiring of cylinder 8 has been detected. There is a signal below the permissible limit value. |
| P030885 | - | Combustion misfiring of cylinder 8 has been detected. There is a signal above the permissible limit value. |
| P030900 | - | Combustion misfiring of cylinder 9 has been detected. |
| P030984 | - | Combustion misfiring of cylinder 9 has been detected. There is a signal below the permissible limit value. |
| P030985 | - | Combustion misfiring of cylinder 9 has been detected. There is a signal above the permissible limit value. |
| P031000 | - | Combustion misfiring of cylinder 10 has been detected. |
| P031084 | - | Combustion misfiring of cylinder 10 has been detected. There is a signal below the permissible limit value. |
| P031085 | - | Combustion misfiring of cylinder 10 has been detected. There is a signal above the permissible limit value. |
| P031100 | - | Combustion misfiring of cylinder 11 has been detected. |
| P031184 | - | Combustion misfiring of cylinder 11 has been detected. There is a signal below the permissible limit value. |
| P031185 | - | Combustion misfiring of cylinder 11 has been detected. There is a signal above the permissible limit value. |
| P031200 | - | Combustion misfiring of cylinder 12 has been detected. |
| P031284 | - | Combustion misfiring of cylinder 12 has been detected. There is a signal below the permissible limit value. |
| P031285 | - | Combustion misfiring of cylinder 12 has been detected. There is a signal above the permissible limit value. |
| P032400 | - | The knock control has a malfunction. |
| P032427 | - | This error code can be ignored and erased. |
| P032711 | - | Knock sensor 1 (cylinder bank 1) has a short circuit to ground. There is a short circuit to ground. |
| P032714 | - | Knock sensor 1 (cylinder bank 1) has a short circuit to ground. There is a short circuit to ground or an open circuit. |
| P032784 | - | Knock sensor 1 (cylinder bank 1) has a short circuit to ground. There is a signal below the permissible limit value. |
| P032812 | - | Knock sensor 1 (cylinder bank 1) has a short circuit to positive. There is a short circuit to positive. |
| P032815 | - | Knock sensor 1 (cylinder bank 1) has a short circuit to positive. There is a short circuit to positive or an open circuit. |
| P032885 | - | Knock sensor 1 (cylinder bank 1) has a short circuit to positive. There is a signal above the permissible limit value. |
| P032C11 | - | Knock sensor 2 (cylinder bank 1) has a short circuit to ground. There is a short circuit to ground. |
| P032C14 | - | Knock sensor 2 (cylinder bank 1) has a short circuit to ground. There is a short circuit to ground or an open circuit. |
| P032C84 | - | Knock sensor 2 (cylinder bank 1) has a short circuit to ground. There is a signal below the permissible limit value. |
| P032D12 | - | Knock sensor 2 (cylinder bank 1) has a short circuit to positive. There is a short circuit to positive. |
| P032D15 | - | Knock sensor 2 (cylinder bank 1) has a short circuit to positive. There is a short circuit to positive or an open circuit. |
| P032D85 | - | Knock sensor 2 (cylinder bank 1) has a short circuit to positive. There is a signal above the permissible limit value. |
| P033211 | - | Knock sensor 1 (cylinder bank 2) has a short circuit to ground. There is a short circuit to ground. |
| P033214 | - | Knock sensor 1 (cylinder bank 2) has a short circuit to ground. There is a short circuit to ground or an open circuit. |
| P033284 | - | Knock sensor 1 (cylinder bank 2) has a short circuit to ground. There is a signal below the permissible limit value. |
| P033312 | - | Knock sensor 1 (cylinder bank 2) has a short circuit to positive. There is a short circuit to positive. |
| P033315 | - | Knock sensor 1 (cylinder bank 2) has a short circuit to positive. There is a short circuit to positive or an open circuit. |
| P033385 | - | Knock sensor 1 (cylinder bank 2) has a short circuit to positive. There is a signal above the permissible limit value. |
| P033500 | - | Position sensor 1 for the crankshaft has an electrical fault. |
| P033502 | - | Position sensor 1 for the crankshaft has an electrical fault. There is a general signal fault. |
| P033900 | - | Position sensor 1 for the crankshaft has a sporadic malfunction. |
| P033901 | - | Position sensor 1 for the crankshaft has a sporadic malfunction. There is a general electrical fault. |
| P033902 | - | Position sensor 1 for the crankshaft has a sporadic malfunction. There is a general signal fault. |
| P033903 | - | Position sensor 1 for the crankshaft has a sporadic malfunction. There is a frequency or pulse width modulation fault. |
| P033904 | - | Position sensor 1 for the crankshaft has a sporadic malfunction. There is an internal fault. |
| P033905 | - | Position sensor 1 for the crankshaft has a sporadic malfunction. There is a programming fault. |
| P033906 | - | Position sensor 1 for the crankshaft has a sporadic malfunction. There is an algorithm fault. |
| P033C11 | - | Knock sensor 2 (cylinder bank 2) has a short circuit to ground. There is a short circuit to ground. |
| P033C14 | - | Knock sensor 2 (cylinder bank 2) has a short circuit to ground. There is a short circuit to ground or an open circuit. |
| P033C84 | - | Knock sensor 2 (cylinder bank 2) has a short circuit to ground. There is a signal below the permissible limit value. |
| P033D12 | - | Knock sensor 2 (cylinder bank 2) has a short circuit to positive. There is a short circuit to positive. |
| P033D15 | - | Knock sensor 2 (cylinder bank 2) has a short circuit to positive. There is a short circuit to positive or an open circuit. |
| P033D85 | - | Knock sensor 2 (cylinder bank 2) has a short circuit to positive. There is a signal above the permissible limit value. |
| P034100 | - | The position sensor for the intake camshaft (cylinder bank 1) has a malfunction. |
| P034200 | - | This error code can be ignored and erased. |
| P034300 | - | This error code can be ignored and erased. |
| P035107 | - | The actuation of ignition coil 1 has an electrical fault or open circuit. There is a mechanical fault. |
| P035113 | - | The actuation of ignition coil 1 has an electrical fault or open circuit. There is an open circuit. |
| P03512F | - | This error code can be ignored and erased. |
| P035149 | - | The actuation of ignition coil 1 has an electrical fault or open circuit. There is an internal electrical fault. |
| P035196 | - | The actuation of ignition coil 1 has an electrical fault or open circuit. There is an internal component fault. |
| P035198 | - | The actuation of ignition coil 1 has an electrical fault or open circuit. The component or the system has overtemperature. |
| P035207 | - | The actuation of ignition coil 2 has an electrical fault or open circuit. There is a mechanical fault. |
| P035213 | - | The actuation of ignition coil 2 has an electrical fault or open circuit. There is an open circuit. |
| P03522F | - | This error code can be ignored and erased. |
| P035249 | - | The actuation of ignition coil 2 has an electrical fault or open circuit. There is an internal electrical fault. |
| P035296 | - | The actuation of ignition coil 2 has an electrical fault or open circuit. There is an internal component fault. |
| P035298 | - | The actuation of ignition coil 2 has an electrical fault or open circuit. The component or the system has overtemperature. |
| P035307 | - | The actuation of ignition coil 3 has an electrical fault or open circuit. There is a mechanical fault. |
| P035313 | - | The actuation of ignition coil 3 has an electrical fault or open circuit. There is an open circuit. |
| P03532F | - | This error code can be ignored and erased. |
| P035349 | - | The actuation of ignition coil 3 has an electrical fault or open circuit. There is an internal electrical fault. |
| P035396 | - | The actuation of ignition coil 3 has an electrical fault or open circuit. There is an internal component fault. |
| P035398 | - | The actuation of ignition coil 3 has an electrical fault or open circuit. The component or the system has overtemperature. |
| P035407 | - | The actuation of ignition coil 4 has an electrical fault or open circuit. There is a mechanical fault. |
| P035413 | - | The actuation of ignition coil 4 has an electrical fault or open circuit. There is an open circuit. |
| P03542F | - | This error code can be ignored and erased. |
| P035449 | - | The actuation of ignition coil 4 has an electrical fault or open circuit. There is an internal electrical fault. |
| P035496 | - | The actuation of ignition coil 4 has an electrical fault or open circuit. There is an internal component fault. |
| P035498 | - | The actuation of ignition coil 4 has an electrical fault or open circuit. The component or the system has overtemperature. |
| P035507 | - | The actuation of ignition coil 5 has an electrical fault or open circuit. There is a mechanical fault. |
| P035513 | - | The actuation of ignition coil 5 has an electrical fault or open circuit. There is an open circuit. |
| P03552F | - | This error code can be ignored and erased. |
| P035549 | - | The actuation of ignition coil 5 has an electrical fault or open circuit. There is an internal electrical fault. |
| P035596 | - | The actuation of ignition coil 5 has an electrical fault or open circuit. There is an internal component fault. |
| P035598 | - | The actuation of ignition coil 5 has an electrical fault or open circuit. The component or the system has overtemperature. |
| P035607 | - | The actuation of ignition coil 6 has an electrical fault or open circuit. There is a mechanical fault. |
| P035613 | - | The actuation of ignition coil 6 has an electrical fault or open circuit. There is an open circuit. |
| P03562F | - | This error code can be ignored and erased. |
| P035649 | - | The actuation of ignition coil 6 has an electrical fault or open circuit. There is an internal electrical fault. |
| P035696 | - | The actuation of ignition coil 6 has an electrical fault or open circuit. There is an internal component fault. |
| P035698 | - | The actuation of ignition coil 6 has an electrical fault or open circuit. The component or the system has overtemperature. |
| P035707 | - | The actuation of ignition coil 7 has an electrical fault or open circuit. There is a mechanical fault. |
| P035713 | - | The actuation of ignition coil 7 has an electrical fault or open circuit. There is an open circuit. |
| P03572F | - | This error code can be ignored and erased. |
| P035749 | - | The actuation of ignition coil 7 has an electrical fault or open circuit. There is an internal electrical fault. |
| P035796 | - | The actuation of ignition coil 7 has an electrical fault or open circuit. There is an internal component fault. |
| P035798 | - | The actuation of ignition coil 7 has an electrical fault or open circuit. The component or the system has overtemperature. |
| P035807 | - | The actuation of ignition coil 8 has an electrical fault or open circuit. There is a mechanical fault. |
| P035813 | - | The actuation of ignition coil 8 has an electrical fault or open circuit. There is an open circuit. |
| P03582F | - | This error code can be ignored and erased. |
| P035849 | - | The actuation of ignition coil 8 has an electrical fault or open circuit. There is an internal electrical fault. |
| P035896 | - | The actuation of ignition coil 8 has an electrical fault or open circuit. There is an internal component fault. |
| P035898 | - | The actuation of ignition coil 8 has an electrical fault or open circuit. The component or the system has overtemperature. |
| P035907 | - | The actuation of ignition coil 9 has an electrical fault or open circuit. There is a mechanical fault. |
| P035913 | - | The actuation of ignition coil 9 has an electrical fault or open circuit. There is an open circuit. |
| P03592F | - | This error code can be ignored and erased. |
| P035949 | - | The actuation of ignition coil 9 has an electrical fault or open circuit. There is an internal electrical fault. |
| P035996 | - | The actuation of ignition coil 9 has an electrical fault or open circuit. There is an internal component fault. |
| P035998 | - | The actuation of ignition coil 9 has an electrical fault or open circuit. The component or the system has overtemperature. |
| P036007 | - | The actuation of ignition coil 10 has an electrical fault or open circuit. There is a mechanical fault. |
| P036013 | - | The actuation of ignition coil 10 has an electrical fault or open circuit. There is an open circuit. |
| P03602F | - | This error code can be ignored and erased. |
| P036049 | - | The actuation of ignition coil 10 has an electrical fault or open circuit. There is an internal electrical fault. |
| P036096 | - | The actuation of ignition coil 10 has an electrical fault or open circuit. There is an internal component fault. |
| P036098 | - | The actuation of ignition coil 10 has an electrical fault or open circuit. The component or the system has overtemperature. |
| P036107 | - | The actuation of ignition coil 11 has an electrical fault or open circuit. There is a mechanical fault. |
| P036113 | - | The actuation of ignition coil 11 has an electrical fault or open circuit. There is an open circuit. |
| P03612F | - | This error code can be ignored and erased. |
| P036149 | - | The actuation of ignition coil 11 has an electrical fault or open circuit. There is an internal electrical fault. |
| P036196 | - | The actuation of ignition coil 11 has an electrical fault or open circuit. There is an internal component fault. |
| P036198 | - | The actuation of ignition coil 11 has an electrical fault or open circuit. The component or the system has overtemperature. |
| P036207 | - | The actuation of ignition coil 12 has an electrical fault or open circuit. There is a mechanical fault. |
| P036213 | - | The actuation of ignition coil 12 has an electrical fault or open circuit. There is an open circuit. |
| P03622F | - | This error code can be ignored and erased. |
| P036249 | - | The actuation of ignition coil 12 has an electrical fault or open circuit. There is an internal electrical fault. |
| P036296 | - | The actuation of ignition coil 12 has an electrical fault or open circuit. There is an internal component fault. |
| P036298 | - | The actuation of ignition coil 12 has an electrical fault or open circuit. The component or the system has overtemperature. |
| P041000 | - | The secondary air system has a malfunction. |
| P041300 | - | Secondary air valve 1 has an open circuit. |
| P041511 | - | Secondary air valve 2 has an electrical fault. There is a short circuit to ground. |
| P041512 | - | Secondary air valve 2 has an electrical fault. There is a short circuit to positive. |
| P041600 | - | Secondary air valve 2 has an open circuit. |
| P041800 | - | Actuation of secondary air system 1 (air pump) has an electrical fault. |
| P041F00 | - | Secondary air valve 1 has a short circuit to ground. |
| P042000 | - | The efficiency of the catalytic converter (cylinder bank 1) is insufficient. |
| P043000 | - | The efficiency of the catalytic converter (cylinder bank 2) is insufficient. |
| P043500 | - | This error code can be ignored and erased. |
| P043504 | - | This error code can be ignored and erased. |
| P044200 | - | A fine leak in the evaporative emission control system was detected. |
| P044400 | - | The purge valve of the evaporative emission control system has an open circuit. |
| P044700 | - | The shutoff valve of the activated charcoal canister has an open circuit. |
| P044F00 | - | Secondary air valve 1 has a short circuit to positive. |
| P045100 | - | The pressure sensor/pressure switch of the evaporative emission control system has a malfunction. |
| P045116 | - | This error code can be ignored and erased. |
| P045117 | - | This error code can be ignored and erased. |
| P045124 | - | The pressure sensor/pressure switch of the evaporative emission control system has a malfunction. No signal change: Voltage level is too high. |
| P045126 | - | The pressure sensor/pressure switch of the evaporative emission control system has a malfunction. The signal change rate is below the permissible limit value. |
| P045128 | - | The pressure sensor/pressure switch of the evaporative emission control system has a malfunction. The signal offset is outside the permissible range. |
| P045200 | - | The pressure sensor/pressure switch of the evaporative emission control system has a short circuit to ground. |
| P045300 | - | The pressure sensor/pressure switch of the evaporative emission control system has a short circuit to positive. |
| P045500 | - | A gross leak in the evaporative emission control system was detected. |
| P045600 | - | A very fine leak in the evaporative emission control system was detected. |
| P045604 | - | A very fine leak in the evaporative emission control system was detected. There is an internal fault. |
| P045700 | - | Leakage in the evaporative emission control system was detected (tank cap missing). |
| P045709 | - | Leakage in the evaporative emission control system was detected (tank cap missing). There is a component fault. |
| P045800 | - | The purge valve of the evaporative emission control system has a short circuit to ground. |
| P045900 | - | The purge valve of the evaporative emission control system has a short circuit to positive. |
| P046100 | - | This error code can be ignored and erased. |
| P046184 | - | This error code can be ignored and erased. |
| P046185 | - | The left fuel level sensor has a malfunction. There is a signal above the permissible limit value. |
| P046211 | - | The left fuel level sensor has a short circuit to ground. There is a short circuit to ground. |
| P046312 | - | The left fuel level sensor has a short circuit to positive. There is a short circuit to positive. |
| P048000 | - | The output of electric fan 1 has an electrical fault or an open circuit. |
| P048013 | - | This error code can be ignored and erased. |
| P048300 | - | The electric fan has a malfunction. |
| P048309 | - | The electric fan has a malfunction. There is a component fault. |
| P048568 | - | The power supply of the electric fan has a malfunction. There is incomplete information. |
| P049100 | - | The air flow of the secondary air system (cylinder bank 1) is too low. |
| P049200 | - | The air flow of the secondary air system (cylinder bank 2) is too low. |
| P049600 | - | The purge flow of the evaporative emission control system is too high. |
| P049697 | - | This error code can be ignored and erased. |
| P049700 | - | The purge flow of the evaporative emission control system is too low. |
| P049792 | - | This error code can be ignored and erased. |
| P049800 | - | The shutoff valve of the activated charcoal canister has a short circuit to ground. |
| P049900 | - | The shutoff valve of the activated charcoal canister has a short circuit to positive. |
| P050000 | - | Speed sensor 1 has an electrical fault. |
| P050008 | - | Speed sensor 1 has a malfunction. There is a signal fault or the message is faulty. |
| P050500 | - | The idle speed control has a malfunction. |
| P050609 | - | Idle speed is too low when engine is warm. There is a component fault. |
| P050709 | - | Idle speed is too high when engine is warm. There is a component fault. |
| P050A92 | - | Idle speed control has a malfunction during a cold start. The function or the instruction is faulty. |
| P050A94 | - | Idle speed control has a malfunction during a cold start. There is an unexpected instruction. |
| P050B00 | - | The ignition angle setting has a malfunction when cold starting. |
| P050C62 | - | The coolant temperature of the combustion engine is implausible during a cold start. The signal comparison is faulty. |
| P050C64 | - | The coolant temperature of the combustion engine is implausible during a cold start. There is an implausible signal. |
| P051200 | - | The start enable has a malfunction. |
| P051204 | - | The start enable has a malfunction. There is an internal fault. |
| P051301 | - | The start enable was not issued. There is a general electrical fault. |
| P051302 | - | The start enable was not issued. There is a general signal fault. |
| P051303 | - | The start enable was not issued. There is a frequency or pulse width modulation fault. |
| P051304 | - | The start enable was not issued. There is an internal fault. |
| P051305 | - | The start enable was not issued. There is a programming fault. |
| P051306 | - | The start enable was not issued. There is an algorithm fault. |
| P051307 | - | The start enable was not issued. There is a mechanical fault. |
| P051308 | - | The start enable was not issued. There is a signal fault or the message is faulty. |
| P051309 | - | The start enable was not issued. There is a component fault. |
| P051310 | - | The start enable was not issued. Reserved for ISO/SAE |
| P051311 | - | The start enable was not issued. There is a short circuit to ground. |
| P051312 | - | The start enable was not issued. There is a short circuit to positive. |
| P051313 | - | The start enable was not issued. There is an open circuit. |
| P051314 | - | The start enable was not issued. There is a short circuit to ground or an open circuit. |
| P051315 | - | The start enable was not issued. There is a short circuit to positive or an open circuit. |
| P051316 | - | The start enable was not issued. The limit value for electrical voltage has not been attained. |
| P052100 | - | This error code can be ignored and erased. |
| P052200 | - | This error code can be ignored and erased. |
| P052300 | - | This error code can be ignored and erased. |
| P052400 | - | This error code can be ignored and erased. |
| P053200 | - | This error code can be ignored and erased. |
| P053300 | - | This error code can be ignored and erased. |
| P053400 | - | This error code can be ignored and erased. |
| P053600 | - | This error code can be ignored and erased. |
| P053700 | - | This error code can be ignored and erased. |
| P053800 | - | This error code can be ignored and erased. |
| P056000 | - | The on-board electrical system voltage has a malfunction. |
| P056001 | - | The on-board electrical system voltage has a malfunction. There is a general electrical fault. |
| P056002 | - | The on-board electrical system voltage has a malfunction. There is a general signal fault. |
| P05601C | - | The on-board electrical system voltage has a malfunction. The voltage value is outside the permissible range. |
| P056200 | - | The on-board power supply voltage is too low. |
| P056300 | - | The on-board power supply voltage is too high. |
| P057129 | - | The switch 'Brake light' has a malfunction. There is an invalid signal. |
| P057164 | - | The switch 'Brake light' has a malfunction. There is an implausible signal. |
| P057529 | - | The input 'Cruise control' has an electrical fault. There is an invalid signal. |
| P059700 | - | This error code can be ignored and erased. |
| P059800 | - | This error code can be ignored and erased. |
| P059900 | - | This error code can be ignored and erased. |
| P060400 | - | There is an internal control unit fault in the RAM memory. |
| P060404 | - | There is an internal control unit fault in the RAM memory. There is an internal fault. |
| P060405 | - | There is an internal control unit fault in the RAM memory. There is a programming fault. |
| P060408 | - | There is an internal control unit fault in the RAM memory. There is a signal fault or the message is faulty. |
| P060416 | - | There is an internal control unit fault in the RAM memory. The limit value for electrical voltage has not been attained. |
| P060417 | - | There is an internal control unit fault in the RAM memory. The limit value for electrical voltage has been exceeded. |
| P060700 | - | The control unit has a malfunction. |
| P060704 | - | The control unit has a malfunction. There is an internal fault. |
| P060710 | - | The control unit has a malfunction. Reserved for ISO/SAE |
| P060711 | - | The control unit has a malfunction. There is a short circuit to ground. |
| P060712 | - | The control unit has a malfunction. There is a short circuit to positive. |
| P060713 | - | The control unit has a malfunction. There is an open circuit. |
| P060714 | - | The control unit has a malfunction. There is a short circuit to ground or an open circuit. |
| P060715 | - | The control unit has a malfunction. There is a short circuit to positive or an open circuit. |
| P060716 | - | The control unit has a malfunction. The limit value for electrical voltage has not been attained. |
| P060717 | - | The control unit has a malfunction. The limit value for electrical voltage has been exceeded. |
| P060741 | - | The control unit has a malfunction. There is a general checksum error. |
| P060748 | - | The control unit has a malfunction. There is an error in the control memory. |
| P060764 | - | This error code can be ignored and erased. |
| P060B00 | - | There is an internal control unit fault in the analog/digital converter. |
| P060C02 | - | There is an internal control unit fault in the central processing unit. There is a general signal fault. |
| P060C04 | - | There is an internal control unit fault in the central processing unit. There is an internal fault. |
| P060C09 | - | There is an internal control unit fault in the central processing unit. There is a component fault. |
| P060C17 | - | There is an internal control unit fault in the central processing unit. The limit value for electrical voltage has been exceeded. |
| P060C29 | - | There is an internal control unit fault in the central processing unit. There is an invalid signal. |
| P060C47 | - | There is an internal control unit fault in the central processing unit. There is a runtime error. |
| P060D64 | - | The signals of accelerator pedal sensors 1 and 2 are implausible in relation to each other. There is an implausible signal. |
| P061509 | - | The starter relay has an electrical fault. There is a component fault. |
| P061513 | - | The starter relay has an electrical fault. There is an open circuit. |
| P061605 | - | This error code can be ignored and erased. |
| P061606 | - | This error code can be ignored and erased. |
| P061614 | - | The starter relay has a short circuit to ground. There is a short circuit to ground or an open circuit. |
| P061703 | - | This error code can be ignored and erased. |
| P061704 | - | This error code can be ignored and erased. |
| P061715 | - | The starter relay has a short circuit to positive. There is a short circuit to positive or an open circuit. |
| P061A00 | - | The torque control of the control unit has a malfunction. |
| P061A26 | - | The torque control of the control unit has a malfunction. The signal change rate is below the permissible limit value. |
| P061A27 | - | The torque control of the control unit has a malfunction. The signal change rate is above the permissible limit value. |
| P061A28 | - | The torque control of the control unit has a malfunction. The signal offset is outside the permissible range. |
| P061A61 | - | The torque control of the control unit has a malfunction. The signal calculation is faulty. |
| P061A62 | - | The torque control of the control unit has a malfunction. The signal comparison is faulty. |
| P061B00 | - | The torque calculation of the control unit has a malfunction. |
| P061B01 | - | The torque calculation of the control unit has a malfunction. There is a general electrical fault. |
| P061B05 | - | This error code can be ignored and erased. |
| P061B06 | - | This error code can be ignored and erased. |
| P061B08 | - | The torque calculation of the control unit has a malfunction. There is a signal fault or the message is faulty. |
| P061B85 | - | The torque calculation of the control unit has a malfunction. There is a signal above the permissible limit value. |
| P061C00 | - | There is an internal control unit fault affecting the calculation of the engine speed. |
| P061C02 | - | There is an internal control unit fault affecting the calculation of the engine speed. There is a general signal fault. |
| P061C04 | - | There is an internal control unit fault affecting the calculation of the engine speed. There is an internal fault. |
| P061D00 | - | There is an internal control unit fault in the monitoring function for the air mass. |
| P061D46 | - | There is an internal control unit fault in the monitoring function for the air mass. There is an error in the calibration or parameterization memory. |
| P061D64 | - | There is an internal control unit fault in the monitoring function for the air mass. There is an implausible signal. |
| P062700 | - | The output for the fuel pump has an electrical fault or open circuit. |
| P062713 | - | The output for the fuel pump has an electrical fault or open circuit. There is an open circuit. |
| P062800 | - | The output for the fuel pump has a short circuit to ground. |
| P062811 | - | The output for the fuel pump has a short circuit to ground. There is a short circuit to ground. |
| P062900 | - | The output for the fuel pump has a short circuit to positive. |
| P062A00 | - | This error code can be ignored and erased. |
| P062B00 | - | There is an internal control unit fault in the monitoring function for the fuel injectors. |
| P062C00 | - | This error code can be ignored and erased. |
| P062F04 | - | This error code can be ignored and erased. |
| P062F05 | - | This error code can be ignored and erased. |
| P062F06 | - | This error code can be ignored and erased. |
| P063400 | - | This error code can be ignored and erased. |
| P063884 | - | This error code can be ignored and erased. |
| P063885 | - | This error code can be ignored and erased. |
| P063E07 | - | The throttle valve adaptation has a malfunction. There is a mechanical fault. |
| P064104 | - | Output 1 for the reference voltage of the sensors has an electrical fault or an open circuit. There is an internal fault. |
| P064D04 | - | The processor of the oxygen sensor (cylinder bank 1) in the control unit has a malfunction. There is an internal fault. |
| P064D84 | - | The processor of the oxygen sensor (cylinder bank 1) in the control unit has a malfunction. There is a signal below the permissible limit value. |
| P064D85 | - | The processor of the oxygen sensor (cylinder bank 1) in the control unit has a malfunction. There is a signal above the permissible limit value. |
| P064D86 | - | The processor of the oxygen sensor (cylinder bank 1) in the control unit has a malfunction. There is an incorrect signal. |
| P064E04 | - | The processor of the oxygen sensor (cylinder bank 2) in the control unit has a malfunction. There is an internal fault. |
| P064E84 | - | The processor of the oxygen sensor (cylinder bank 2) in the control unit has a malfunction. There is a signal below the permissible limit value. |
| P064E85 | - | The processor of the oxygen sensor (cylinder bank 2) in the control unit has a malfunction. There is a signal above the permissible limit value. |
| P064E86 | - | The processor of the oxygen sensor (cylinder bank 2) in the control unit has a malfunction. There is an incorrect signal. |
| P065100 | - | Output 2 for the reference voltage of the sensors has an electrical fault or an open circuit. |
| P065104 | - | Output 2 for the reference voltage of the sensors has an electrical fault or an open circuit. There is an internal fault. |
| P065116 | - | Output 2 for the reference voltage of the sensors has an electrical fault or an open circuit. The limit value for electrical voltage has not been attained. |
| P065117 | - | Output 2 for the reference voltage of the sensors has an electrical fault or an open circuit. The limit value for electrical voltage has been exceeded. |
| P065413 | - | This error code can be ignored and erased. |
| P065B00 | - | The alternator has a malfunction. |
| P066700 | - | This error code can be ignored and erased. |
| P066716 | - | This error code can be ignored and erased. |
| P066717 | - | This error code can be ignored and erased. |
| P066729 | - | This error code can be ignored and erased. |
| P069100 | - | The output of electric fan 1 has a short circuit to ground. |
| P069116 | - | This error code can be ignored and erased. |
| P069200 | - | The output of electric fan 1 has a short circuit to positive. |
| P069212 | - | This error code can be ignored and erased. |
| P069704 | - | Output 3 for the reference voltage of the sensors has an electrical fault or an open circuit. There is an internal fault. |
| P069716 | - | Output 3 for the reference voltage of the sensors has an electrical fault or an open circuit. The limit value for electrical voltage has not been attained. |
| P069717 | - | Output 3 for the reference voltage of the sensors has an electrical fault or an open circuit. The limit value for electrical voltage has been exceeded. |
| P06AF00 | - | The torque control system has triggered torque limitation or shutoff of the combustion engine. |
| P06DA00 | - | The actuation of the valve of the oil pump in the combustion engine has an electrical fault or open circuit. |
| P06DB00 | - | This error code can be ignored and erased. |
| P06DC00 | - | This error code can be ignored and erased. |
| P06ED11 | - | This error code can be ignored and erased. |
| P06EE12 | - | This error code can be ignored and erased. |
| P070229 | - | Control unit ""Transmission"" has a malfunction. There is an invalid signal. |
| P0A0F05 | - | This error code can be ignored and erased. |
| P0A0F97 | - | The engine does not start. The system function is restricted. |
| P0A1400 | - | This error code can be ignored and erased. |
| P0A1500 | - | This error code can be ignored and erased. |
| P0A1600 | - | This error code can be ignored and erased. |
| P0A7D18 | - | This error code can be ignored and erased. |
| P0A7D1F | - | This error code can be ignored and erased. |
| P0AB900 | - | This error code can be ignored and erased. |
| P0AB901 | - | This error code can be ignored and erased. |
| P0AB902 | - | This error code can be ignored and erased. |
| P0AB903 | - | This error code can be ignored and erased. |
| P0AB904 | - | This error code can be ignored and erased. |
| P0AB905 | - | This error code can be ignored and erased. |
| P0AB906 | - | This error code can be ignored and erased. |
| P0AB908 | - | This error code can be ignored and erased. |
| P0AB919 | - | This error code can be ignored and erased. |
| P0AB91A | - | This error code can be ignored and erased. |
| P0AB91B | - | This error code can be ignored and erased. |
| P0AB91D | - | This error code can be ignored and erased. |
| P0AB91E | - | This error code can be ignored and erased. |
| P0AB921 | - | This error code can be ignored and erased. |
| P0AB922 | - | This error code can be ignored and erased. |
| P0AB925 | - | This error code can be ignored and erased. |
| P0AB929 | - | This error code can be ignored and erased. |
| P0AB92F | - | This error code can be ignored and erased. |
| P0AB932 | - | This error code can be ignored and erased. |
| P0AB933 | - | This error code can be ignored and erased. |
| P0AB934 | - | This error code can be ignored and erased. |
| P0AB935 | - | This error code can be ignored and erased. |
| P0AB936 | - | This error code can be ignored and erased. |
| P0AB937 | - | This error code can be ignored and erased. |
| P0AB938 | - | This error code can be ignored and erased. |
| P0AB939 | - | This error code can be ignored and erased. |
| P0AB93A | - | This error code can be ignored and erased. |
| P0AB953 | - | This error code can be ignored and erased. |
| P0AB956 | - | This error code can be ignored and erased. |
| P0AB961 | - | This error code can be ignored and erased. |
| P0AB964 | - | This error code can be ignored and erased. |
| P0AB965 | - | This error code can be ignored and erased. |
| P0AB966 | - | This error code can be ignored and erased. |
| P0AB967 | - | This error code can be ignored and erased. |
| P0AB968 | - | This error code can be ignored and erased. |
| P0AB981 | - | This error code can be ignored and erased. |
| P0AB984 | - | This error code can be ignored and erased. |
| P0AB986 | - | This error code can be ignored and erased. |
| P0AB98F | - | This error code can be ignored and erased. |
| P0AB992 | - | This error code can be ignored and erased. |
| P0AB993 | - | This error code can be ignored and erased. |
| P0AB994 | - | This error code can be ignored and erased. |
| P0AB99A | - | This error code can be ignored and erased. |
| P0C2F00 | - | There is an internal control unit fault in the monitoring function of signal ""Engine speed"". |
| P126F01 | - | The signal 'Hot start' from the automatic engine start/stop system has a malfunction. There is a general electrical fault. |
| P13A604 | - | The input for the emergency switch-off has a malfunction. There is an internal fault. |
| P13AC12 | - | The output for emergency shutoff of control unit ""Power electronics"" has a short circuit to positive. There is a short circuit to positive. |
| P13AD11 | - | The output for emergency shutoff of control unit ""Power electronics"" has a short circuit to ground. There is a short circuit to ground. |
| P13AE13 | - | The output for emergency shutoff of control unit ""Power electronics"" has an open circuit. There is an open circuit. |
| P13AF12 | - | The output for on-board electrical system switchover has a short circuit to positive. There is a short circuit to positive. |
| P13B011 | - | The output for on-board electrical system switchover has a short circuit to ground. There is a short circuit to ground. |
| P13B113 | - | The output for on-board electrical system switchover has an electrical fault or an open circuit. There is an open circuit. |
| P13B200 | - | Electrical fuse 1 for the ignition coils has a malfunction. |
| P13B300 | - | Electrical fuse 2 for the ignition coils has a malfunction. |
| P13C311 | - | This error code can be ignored and erased. |
| P13C312 | - | This error code can be ignored and erased. |
| P13C313 | - | This error code can be ignored and erased. |
| P13C523 | - | This error code can be ignored and erased. |
| P13C624 | - | This error code can be ignored and erased. |
| P13EA00 | - | The ignition angle setting has a malfunction during cold starting (partial load operation). |
| P13FB00 | - | The vacuum lines of the secondary air valves are misconnected. |
| P150F00 | - | This error code can be ignored and erased. |
| P161404 | - | This error code can be ignored and erased. |
| P161405 | - | This error code can be ignored and erased. |
| P161406 | - | This error code can be ignored and erased. |
| P164400 | - | An incorrect variant coding or configuration was detected. |
| P164404 | - | An incorrect variant coding or configuration was detected. There is an internal fault. |
| P164408 | - | An incorrect variant coding or configuration was detected. There is a signal fault or the message is faulty. |
| P164429 | - | An incorrect variant coding or configuration was detected. There is an invalid signal. |
| P16442A | - | An incorrect variant coding or configuration was detected. There is no signal change. |
| P164456 | - | An incorrect variant coding or configuration was detected. An incorrect or incompatible configuration was detected. |
| P164464 | - | An incorrect variant coding or configuration was detected. There is an implausible signal. |
| P167085 | - | Calibration of the torque curve of the control unit has a malfunction. There is a signal above the permissible limit value. |
| P167B09 | - | This error code can be ignored and erased. |
| P199900 | - | This error code can be ignored and erased. |
| P1A8802 | - | This error code can be ignored and erased. |
| P1CD009 | - | This error code can be ignored and erased. |
| P1CD109 | - | This error code can be ignored and erased. |
| P1CD212 | - | This error code can be ignored and erased. |
| P1CD311 | - | This error code can be ignored and erased. |
| P1CD400 | - | This error code can be ignored and erased. |
| P1CD509 | - | This error code can be ignored and erased. |
| P1CD609 | - | This error code can be ignored and erased. |
| P1CD709 | - | This error code can be ignored and erased. |
| P1CDE00 | - | The ECO start/stop function has detected excessively low engine speed during the starting procedure. |
| P1CDF00 | - | The ECO start/stop function has aborted an engine start due to a fault at sensor ""Neutral position of transmission"" or at switch ""Clutch pedal"". |
| P1CE000 | - | The ECO start/stop function has detected an implausible engine speed. |
| P1CE100 | - | The ECO start/stop function has detected implausible drive authorization data. |
| P1CE200 | - | The ECO start/stop function has detected excessively low engine speed. |
| P1CE577 | - | This error code can be ignored and erased. |
| P1CE678 | - | This error code can be ignored and erased. |
| P1CE700 | - | This error code can be ignored and erased. |
| P1CE800 | - | This error code can be ignored and erased. |
| P1CF100 | - | Injector injection quantity adjustment for cylinder balancing was aborted. |
| P1D0400 | - | The ECO start/stop function has requested a manual engine start. |
| P1D0500 | - | The ECO start/stop function has prevented an engine stop. |
| P1D0600 | - | The ECO start/stop function has a malfunction. |
| P1D0700 | - | The ECO start/stop function has prevented an engine start. |
| P1D2909 | - | This error code can be ignored and erased. |
| P1D2A09 | - | This error code can be ignored and erased. |
| P1D4212 | - | The output for the switchover valve of the bypass flap 'High/low-temperature circuit' has a short circuit to positive. There is a short circuit to positive. |
| P1D4311 | - | The output for the switchover valve of the bypass flap 'High/low-temperature circuit' has a short circuit to ground. There is a short circuit to ground. |
| P1D4413 | - | The output for the switchover valve of the bypass flap 'High/low-temperature circuit' has an electrical fault or an open circuit. There is an open circuit. |
| P1D6D00 | - | The ECO start/stop function has detected an impermissible engine stop. |
| P206600 | - | This error code can be ignored and erased. |
| P206685 | - | The right fuel level sensor has a malfunction. There is a signal above the permissible limit value. |
| P206711 | - | The right fuel level sensor has a short circuit to ground. There is a short circuit to ground. |
| P206812 | - | The right fuel level sensor has a short circuit to positive. There is a short circuit to positive. |
| P207204 | - | The throttle valve is blocked due to ice. There is an internal fault. |
| P207284 | - | The throttle valve is blocked due to ice. There is a signal below the permissible limit value. |
| P207285 | - | The throttle valve is blocked due to ice. There is a signal above the permissible limit value. |
| P207286 | - | The throttle valve is blocked due to ice. There is an incorrect signal. |
| P209600 | - | The mixture is too lean downstream of the catalytic converter (cylinder bank 1). |
| P209700 | - | The mixture is too rich downstream of the catalytic converter (cylinder bank 1). |
| P209800 | - | The mixture is too lean downstream of the catalytic converter (cylinder bank 2). |
| P209900 | - | The mixture is too rich downstream of the catalytic converter (cylinder bank 2). |
| P20B100 | - | This error code can be ignored and erased. |
| P20B300 | - | This error code can be ignored and erased. |
| P20B400 | - | This error code can be ignored and erased. |
| P210100 | - | The throttle valve actuator has a malfunction. |
| P210128 | - | The throttle valve actuator has a malfunction. The signal offset is outside the permissible range. |
| P210129 | - | The throttle valve actuator has a malfunction. There is an invalid signal. |
| P210164 | - | The throttle valve actuator has a malfunction. There is an implausible signal. |
| P210184 | - | The throttle valve actuator has a malfunction. There is a signal below the permissible limit value. |
| P210185 | - | The throttle valve actuator has a malfunction. There is a signal above the permissible limit value. |
| P210200 | - | The throttle valve actuator has a short circuit to ground. |
| P210300 | - | The throttle valve actuator has a short circuit to positive. |
| P211100 | - | The throttle valve is jammed open. |
| P211900 | - | This error code can be ignored and erased. |
| P212200 | - | Position sensor 1 for the accelerator pedal has a short circuit to ground. |
| P212300 | - | Position sensor 1 for the accelerator pedal has a short circuit to positive |
| P212711 | - | Position sensor 2 for the accelerator pedal has a short circuit to ground. There is a short circuit to ground. |
| P212812 | - | Position sensor 2 for the accelerator pedal has a short circuit to positive There is a short circuit to positive. |
| P213500 | - | The values from the position sensors of the throttle valve are implausible relative to each other. |
| P213629 | - | The values from position sensors ""A/C"" of the throttle valve are implausible relative to each other. There is an invalid signal. |
| P213700 | - | The values from position sensors ""B/C"" of the throttle valve are implausible relative to each other. |
| P213800 | - | The values from the position sensors of the accelerator pedal are implausible relative to each other. |
| P217609 | - | This error code can be ignored and erased. |
| P217616 | - | Adaptation of the idle position of the throttle valve actuator was not performed. The limit value for electrical voltage has not been attained. |
| P217617 | - | Adaptation of the idle position of the throttle valve actuator was not performed. The limit value for electrical voltage has been exceeded. |
| P217700 | - | The mixture (cylinder bank 1) is too lean in partial load operation. |
| P217797 | - | The mixture (cylinder bank 1) is too lean in partial load operation. The system function is restricted. |
| P217800 | - | The mixture (cylinder bank 1) is too rich in partial load operation. |
| P217897 | - | The mixture (cylinder bank 1) is too rich in partial load operation. The system function is restricted. |
| P217900 | - | The mixture (cylinder bank 2) is too lean in partial load operation. |
| P217997 | - | The mixture (cylinder bank 2) is too lean in partial load operation. The system function is restricted. |
| P218000 | - | The mixture (cylinder bank 2) is too rich in partial load operation. |
| P218097 | - | The mixture (cylinder bank 2) is too rich in partial load operation. The system function is restricted. |
| P218762 | - | The mixture (cylinder bank 1) is too lean at idle speed. The signal comparison is faulty. |
| P218797 | - | The mixture (cylinder bank 1) is too lean at idle speed. The system function is restricted. |
| P218862 | - | The mixture (cylinder bank 1) is too rich at idle speed. The signal comparison is faulty. |
| P218897 | - | The mixture (cylinder bank 1) is too rich at idle speed. The system function is restricted. |
| P218962 | - | The mixture (cylinder bank 2) at idle is too lean. The signal comparison is faulty. |
| P218997 | - | The mixture (cylinder bank 2) at idle is too lean. The system function is restricted. |
| P219062 | - | The mixture (cylinder bank 2) at idle is too rich. The signal comparison is faulty. |
| P219097 | - | The mixture (cylinder bank 2) at idle is too rich. The system function is restricted. |
| P219500 | - | This error code can be ignored and erased. |
| P219585 | - | The signal from oxygen sensor 1 (cylinder bank 1) is shifted towards ""Lean"". There is a signal above the permissible limit value. |
| P219600 | - | This error code can be ignored and erased. |
| P219684 | - | The signal from oxygen sensor 1 (cylinder bank 1) is shifted towards ""Rich"". There is a signal below the permissible limit value. |
| P219700 | - | This error code can be ignored and erased. |
| P219785 | - | The signal of oxygen sensor 1 (cylinder bank 2) is shifted towards 'Lean'. There is a signal above the permissible limit value. |
| P219800 | - | This error code can be ignored and erased. |
| P219884 | - | The signal of oxygen sensor 1 (cylinder bank 2) is shifted towards 'Rich'. There is a signal below the permissible limit value. |
| P219C77 | - | Mixture formation (cylinder 1) is irregular. The commanded position cannot be reached. |
| P219C78 | - | Mixture formation (cylinder 1) is irregular. The adaptation or adjustment is incorrect. |
| P219D77 | - | Mixture formation (cylinder 2) is irregular. The commanded position cannot be reached. |
| P219D78 | - | Mixture formation (cylinder 2) is irregular. The adaptation or adjustment is incorrect. |
| P219E77 | - | Mixture formation (cylinder 3) is irregular. The commanded position cannot be reached. |
| P219E78 | - | Mixture formation (cylinder 3) is irregular. The adaptation or adjustment is incorrect. |
| P219F77 | - | Mixture formation (cylinder 4) is irregular. The commanded position cannot be reached. |
| P219F78 | - | Mixture formation (cylinder 4) is irregular. The adaptation or adjustment is incorrect. |
| P21A077 | - | Mixture formation (cylinder 5) is irregular. The commanded position cannot be reached. |
| P21A078 | - | Mixture formation (cylinder 5) is irregular. The adaptation or adjustment is incorrect. |
| P21A177 | - | Mixture formation (cylinder 6) is irregular. The commanded position cannot be reached. |
| P21A178 | - | Mixture formation (cylinder 6) is irregular. The adaptation or adjustment is incorrect. |
| P21A277 | - | Mixture formation (cylinder 7) is irregular. The commanded position cannot be reached. |
| P21A278 | - | Mixture formation (cylinder 7) is irregular. The adaptation or adjustment is incorrect. |
| P21A377 | - | Mixture formation (cylinder 8) is irregular. The commanded position cannot be reached. |
| P21A378 | - | Mixture formation (cylinder 8) is irregular. The adaptation or adjustment is incorrect. |
| P21A477 | - | Mixture formation (cylinder 9) is irregular. The commanded position cannot be reached. |
| P21A478 | - | Mixture formation (cylinder 9) is irregular. The adaptation or adjustment is incorrect. |
| P21A577 | - | Mixture formation (cylinder 10) is irregular. The commanded position cannot be reached. |
| P21A578 | - | Mixture formation (cylinder 10) is irregular. The adaptation or adjustment is incorrect. |
| P21A677 | - | Mixture formation (cylinder 11) is irregular. The commanded position cannot be reached. |
| P21A678 | - | Mixture formation (cylinder 11) is irregular. The adaptation or adjustment is incorrect. |
| P21A777 | - | Mixture formation (cylinder 12) is irregular. The commanded position cannot be reached. |
| P21A778 | - | Mixture formation (cylinder 12) is irregular. The adaptation or adjustment is incorrect. |
| P222700 | - | The ambient pressure sensor has a malfunction. |
| P222784 | - | The ambient pressure sensor has a malfunction. There is a signal below the permissible limit value. |
| P222785 | - | The ambient pressure sensor has a malfunction. There is a signal above the permissible limit value. |
| P222786 | - | The ambient pressure sensor has a malfunction. There is an incorrect signal. |
| P222800 | - | The ambient pressure sensor has a short circuit to ground. |
| P222900 | - | The ambient pressure sensor has a short circuit to positive. |
| P222B27 | - | This error code can be ignored and erased. |
| P222B28 | - | Pressure sensor 2 has a malfunction. The signal offset is outside the permissible range. |
| P222B64 | - | Pressure sensor 2 has a malfunction. There is an implausible signal. |
| P222B84 | - | Pressure sensor 2 has a malfunction. There is a signal below the permissible limit value. |
| P222C11 | - | Pressure sensor 2 has a short circuit to ground. There is a short circuit to ground. |
| P222D12 | - | Pressure sensor 2 has a short circuit to positive. There is a short circuit to positive. |
| P223100 | - | This error code can be ignored and erased. |
| P223200 | - | The signal line of oxygen sensor 2 (cylinder bank 1) and the electrical heater circuit have a short circuit to each other. |
| P223400 | - | This error code can be ignored and erased. |
| P223500 | - | The signal line of oxygen sensor 2 (cylinder bank 2) and the electrical heater circuit have a short circuit to each other. |
| P223784 | - | This error code can be ignored and erased. |
| P223785 | - | The pump current connection of oxygen sensor 1 (cylinder bank 1) has an electrical fault or open circuit. There is a signal above the permissible limit value. |
| P223786 | - | This error code can be ignored and erased. |
| P224084 | - | This error code can be ignored and erased. |
| P224085 | - | The pump current connection of oxygen sensor 1 (cylinder bank 2) has an electrical fault or an open circuit. There is a signal above the permissible limit value. |
| P224086 | - | This error code can be ignored and erased. |
| P224300 | - | The reference voltage connection of oxygen sensor 1 (cylinder bank 1) has an electrical fault or open circuit. |
| P224700 | - | The reference voltage connection of oxygen sensor 1 (cylinder bank 2) has an electrical fault or an open circuit. |
| P225100 | - | This error code can be ignored and erased. |
| P225400 | - | This error code can be ignored and erased. |
| P225700 | - | Actuation of secondary air system 1 (air pump) has a short circuit to ground. |
| P225800 | - | Actuation of secondary air system 1 (air pump) has a short circuit to positive. |
| P227000 | - | The signal from oxygen sensor 2 (cylinder bank 1) is shifted towards ""Lean"". |
| P227100 | - | The signal from oxygen sensor 2 (cylinder bank 1) is shifted towards ""Rich"". |
| P227200 | - | The signal of oxygen sensor 2 (cylinder bank 2) is shifted towards 'Lean'. |
| P227300 | - | The signal of oxygen sensor 2 (cylinder bank 2) is shifted towards 'Rich'. |
| P227400 | - | This error code can be ignored and erased. |
| P227500 | - | This error code can be ignored and erased. |
| P227600 | - | This error code can be ignored and erased. |
| P227700 | - | This error code can be ignored and erased. |
| P227900 | - | A leak was detected in the intake air system. |
| P227B27 | - | This error code can be ignored and erased. |
| P227B28 | - | Pressure sensor 3 has a malfunction. The signal offset is outside the permissible range. |
| P227B64 | - | Pressure sensor 3 has a malfunction. There is an implausible signal. |
| P227B84 | - | Pressure sensor 3 has a malfunction. There is a signal below the permissible limit value. |
| P227C11 | - | Pressure sensor 3 has a short circuit to ground. There is a short circuit to ground. |
| P227D12 | - | Pressure sensor 3 has a short circuit to positive. There is a short circuit to positive. |
| P227F00 | - | The air mass flow in the intake air system (cylinder bank 2) has a malfunction. |
| P227F97 | - | The air mass flow in the intake air system (cylinder bank 2) has a malfunction. The system function is restricted. |
| P228000 | - | The air mass flow in the intake air system (cylinder bank 1) has a malfunction. |
| P228097 | - | The air mass flow in the intake air system (cylinder bank 1) has a malfunction. The system function is restricted. |
| P230000 | - | The actuation of ignition coil 1 has a short circuit to ground. |
| P230100 | - | The actuation of ignition coil 1 has a short circuit to positive. |
| P230300 | - | The actuation of ignition coil 2 has a short circuit to ground. |
| P230400 | - | The actuation of ignition coil 2 has a short circuit to positive. |
| P230600 | - | The actuation of ignition coil 3 has a short circuit to ground. |
| P230700 | - | The actuation of ignition coil 3 has a short circuit to positive. |
| P230900 | - | The actuation of ignition coil 4 has a short circuit to ground. |
| P230A00 | - | The mixture formation (cylinder 1) is erratic and injector injection quantity adjustment is disabled. |
| P230B00 | - | The mixture formation (cylinder 2) is erratic and injector injection quantity adjustment is disabled. |
| P230C00 | - | The mixture formation (cylinder 3) is erratic and injector injection quantity adjustment is disabled. |
| P230D00 | - | The mixture formation (cylinder 4) is erratic and injector injection quantity adjustment is disabled. |
| P230E00 | - | The mixture formation (cylinder 5) is erratic and injector injection quantity adjustment is disabled. |
| P230F00 | - | The mixture formation (cylinder 6) is erratic and injector injection quantity adjustment is disabled. |
| P231000 | - | The actuation of ignition coil 4 has a short circuit to positive. |
| P231200 | - | The actuation of ignition coil 5 has a short circuit to ground. |
| P231300 | - | The actuation of ignition coil 5 has a short circuit to positive. |
| P231500 | - | The actuation of ignition coil 6 has a short circuit to ground. |
| P231600 | - | The actuation of ignition coil 6 has a short circuit to positive. |
| P231800 | - | The actuation of ignition coil 7 has a short circuit to ground. |
| P231900 | - | The actuation of ignition coil 7 has a short circuit to positive. |
| P231A00 | - | The mixture formation (cylinder 7) is erratic and injector injection quantity adjustment is disabled. |
| P231B00 | - | The mixture formation (cylinder 8) is erratic and injector injection quantity adjustment is disabled. |
| P231C00 | - | The mixture formation (cylinder 9) is erratic and injector injection quantity adjustment is disabled. |
| P231E00 | - | The mixture formation (cylinder 11) is erratic and injector injection quantity adjustment is disabled. |
| P231F00 | - | The mixture formation (cylinder 12) is erratic and injector injection quantity adjustment is disabled. |
| P232100 | - | The actuation of ignition coil 8 has a short circuit to ground. |
| P232200 | - | The actuation of ignition coil 8 has a short circuit to positive. |
| P232400 | - | The actuation of ignition coil 9 has a short circuit to ground. |
| P232500 | - | The actuation of ignition coil 9 has a short circuit to positive. |
| P232700 | - | The actuation of ignition coil 10 has a short circuit to ground. |
| P232800 | - | The actuation of ignition coil 10 has a short circuit to positive. |
| P233000 | - | The actuation of ignition coil 11 has a short circuit to ground. |
| P233100 | - | The actuation of ignition coil 11 has a short circuit to positive. |
| P233300 | - | The actuation of ignition coil 12 has a short circuit to ground. |
| P233400 | - | The actuation of ignition coil 12 has a short circuit to positive. |
| P233627 | - | This error code can be ignored and erased. |
| P233727 | - | This error code can be ignored and erased. |
| P233827 | - | This error code can be ignored and erased. |
| P233927 | - | This error code can be ignored and erased. |
| P234027 | - | This error code can be ignored and erased. |
| P234127 | - | This error code can be ignored and erased. |
| P234227 | - | This error code can be ignored and erased. |
| P234327 | - | This error code can be ignored and erased. |
| P234427 | - | This error code can be ignored and erased. |
| P234527 | - | This error code can be ignored and erased. |
| P234627 | - | This error code can be ignored and erased. |
| P234727 | - | This error code can be ignored and erased. |
| P241400 | - | The signal of oxygen sensor 1 (cylinder bank 1) is implausible. |
| P241500 | - | The signal of oxygen sensor 1 (cylinder bank 2) is implausible. |
| P242200 | - | The shutoff valve of the activated charcoal canister sticks in the closed position. |
| P243100 | - | The pressure sensor of the secondary air system has a malfunction. |
| P243126 | - | The pressure sensor of the secondary air system has a malfunction. The signal change rate is below the permissible limit value. |
| P243127 | - | The pressure sensor of the secondary air system has a malfunction. The signal change rate is above the permissible limit value. |
| P243128 | - | The pressure sensor of the secondary air system has a malfunction. The signal offset is outside the permissible range. |
| P243200 | - | The pressure sensor of the secondary air system has a short circuit to ground. |
| P243300 | - | The pressure sensor of the secondary air system has a short circuit to positive. |
| P244000 | - | The secondary air valve (cylinder bank 1) is jammed open. |
| P244200 | - | The secondary air valve (cylinder bank 2) is stuck open. |
| P24D628 | - | Pressure sensor/pressure switch 2 of the evaporative emission control system has a malfunction. The signal offset is outside the permissible range. |
| P24D62A | - | Pressure sensor/pressure switch 2 of the evaporative emission control system has a malfunction. There is no signal change. |
| P24D700 | - | Pressure sensor/pressure switch 2 of the evaporative emission control system has a short circuit to ground. |
| P24D800 | - | Pressure sensor/pressure switch 2 of the evaporative emission control system has a short circuit to positive. |
| P250500 | - | This error code can be ignored and erased. |
| P250513 | - | The power supply at the input of the control unit 'combustion engine' has an electrical fault. There is an open circuit. |
| P250516 | - | This error code can be ignored and erased. |
| P250517 | - | This error code can be ignored and erased. |
| P25051C | - | The power supply at the input of the control unit 'combustion engine' has an electrical fault. The voltage value is outside the permissible range. |
| P250B46 | - | This error code can be ignored and erased. |
| P250B92 | - | The oil level sensor has a malfunction. The function or the instruction is faulty. |
| P250B96 | - | The oil level sensor has a malfunction. There is an internal component fault. |
| P250E2A | - | The oil level sensor has a sporadic malfunction. There is no signal change. |
| P250E46 | - | The oil level sensor has a sporadic malfunction. There is an error in the calibration or parameterization memory. |
| P252B46 | - | This error code can be ignored and erased. |
| P252B92 | - | The oil sensor has a malfunction. The function or the instruction is faulty. |
| P252B94 | - | The oil sensor has a malfunction. There is an unexpected instruction. |
| P254000 | - | This error code can be ignored and erased. |
| P254100 | - | The pressure sensor of the low-pressure fuel circuit has a short circuit to ground. |
| P254200 | - | The pressure sensor of the low-pressure fuel circuit has a short circuit to positive. |
| P256800 | - | This error code can be ignored and erased. |
| P256804 | - | This error code can be ignored and erased. |
| P256809 | - | This error code can be ignored and erased. |
| P25681C | - | This error code can be ignored and erased. |
| P256885 | - | This error code can be ignored and erased. |
| P256900 | - | This error code can be ignored and erased. |
| P257000 | - | This error code can be ignored and erased. |
| P257187 | - | This error code can be ignored and erased. |
| P257300 | - | This error code can be ignored and erased. |
| P257D00 | - | The contact switch 'Engine hood' 1 has a malfunction. |
| P261008 | - | The engine off time has an implausible value. There is a signal fault or the message is faulty. |
| P261029 | - | The engine off time has an implausible value. There is an invalid signal. |
| P261082 | - | The engine off time has an implausible value. The instruction counter is not updated. |
| P261084 | - | The engine off time has an implausible value. There is a signal below the permissible limit value. |
| P261085 | - | The engine off time has an implausible value. There is a signal above the permissible limit value. |
| P261713 | - | The signal of the position sensor of the crankshaft has an electrical fault or an open circuit. There is an open circuit. |
| P261A00 | - | This error code can be ignored and erased. |
| P261C00 | - | This error code can be ignored and erased. |
| P261D00 | - | This error code can be ignored and erased. |
| P262600 | - | The trimming resistor connection of oxygen sensor 1 (cylinder bank 1) has an electrical fault or open circuit. |
| P262900 | - | The trimming resistor connection of oxygen sensor 1 (cylinder bank 2) has an electrical fault or an open circuit. |
| P312C00 | - | This error code can be ignored and erased. |
| U000900 | - | This error code can be ignored and erased. |
| U002886 | - | Communication with the drivetrain CAN bus has a malfunction. There is an incorrect signal. |
| U002888 | - | Communication with the drivetrain CAN bus has a malfunction. Bus OFF |
| U003788 | - | Communication with the chassis CAN bus has a malfunction. Bus OFF |
| U004688 | - | This error code can be ignored and erased. |
| U005588 | - | This error code can be ignored and erased. |
| U007308 | - | Drive train CAN bus OFF fault There is a signal fault or the message is faulty. |
| U010187 | - | Communication with control unit ""Transmission"" has a malfunction. The message is missing. |
| U010287 | - | Communication with the transfer case has a malfunction. The message is missing. |
| U010300 | - | Communication with the electronic selector lever module has a malfunction. |
| U010387 | - | Communication with the electronic selector lever module has a malfunction. The message is missing. |
| U010987 | - | Communication with control unit ""Fuel pump"" has a malfunction. The message is missing. |
| U011087 | - | This error code can be ignored and erased. |
| U011187 | - | This error code can be ignored and erased. |
| U011587 | - | Communication with control unit 'Drivetrain' has a malfunction. The message is missing. |
| U012008 | - | Communication with the starter or alternator has a malfunction. There is a signal fault or the message is faulty. |
| U012087 | - | Communication with the starter or alternator has a malfunction. The message is missing. |
| U012287 | - | Communication with control unit 'Traction system' has a malfunction. The message is missing. |
| U012887 | - | Communication with the electric parking brake has a malfunction. The message is missing. |
| U013287 | - | This error code can be ignored and erased. |
| U014000 | - | This error code can be ignored and erased. |
| U014687 | - | Communication with the central gateway has a malfunction. The message is missing. |
| U015108 | - | Communication with the supplemental restraint system (SRS) has a malfunction. There is a signal fault or the message is faulty. |
| U015187 | - | Communication with the supplemental restraint system (SRS) has a malfunction. The message is missing. |
| U015500 | - | Communication with the instrument cluster has a malfunction. |
| U015587 | - | Communication with the instrument cluster has a malfunction. The message is missing. |
| U01558F | - | Communication with the instrument cluster has a malfunction. The signal or message is erratic. |
| U015987 | - | Communication with PARKTRONIC has a malfunction. The message is missing. |
| U016487 | - | Communication with the air conditioning has a malfunction. The message is missing. |
| U016887 | - | This error code can be ignored and erased. |
| U016B87 | - | This error code can be ignored and erased. |
| U019B00 | - | This error code can be ignored and erased. |
| U021287 | - | Communication with the steering column module has a malfunction. The message is missing. |
| U025600 | - | Communication with the control unit 'AMG DRIVE UNIT' has a malfunction. |
| U025900 | - | Communication with the parameterizable special module (PSM) has a malfunction. |
| U025987 | - | This error code can be ignored and erased. |
| U029287 | - | This error code can be ignored and erased. |
| U029300 | - | This error code can be ignored and erased. |
| U029387 | - | This error code can be ignored and erased. |
| U029887 | - | This error code can be ignored and erased. |
| U029A87 | - | This error code can be ignored and erased. |
| U029D87 | - | This error code can be ignored and erased. |
| U029E87 | - | This error code can be ignored and erased. |
| U040208 | - | Implausible data were received from control unit 'Transmission'. There is a signal fault or the message is faulty. |
| U040308 | - | Implausible data were received from the transfer case. There is a signal fault or the message is faulty. |
| U040400 | - | Implausible data were received from the electronic selector lever module. |
| U040408 | - | Implausible data were received from the electronic selector lever module. There is a signal fault or the message is faulty. |
| U041108 | - | This error code can be ignored and erased. |
| U041208 | - | Implausible data were received from control unit ""Battery"". There is a signal fault or the message is faulty. |
| U041608 | - | Implausible data were received from control unit 'Traction system'. There is a signal fault or the message is faulty. |
| U041681 | - | Implausible data were received from control unit 'Traction system'. Incorrect data were received. |
| U041708 | - | Implausible data were received from the electric parking brake. There is a signal fault or the message is faulty. |
| U041800 | - | This error code can be ignored and erased. |
| U042108 | - | Implausible data were received from control unit ""Suspension"". There is a signal fault or the message is faulty. |
| U042300 | - | Implausible data were received from the instrument cluster. |
| U042408 | - | Implausible data were received from the air conditioning. There is a signal fault or the message is faulty. |
| U04244A | - | Implausible data were received from the air conditioning. The wrong component is installed. |
| U042486 | - | Implausible data were received from the air conditioning. There is an incorrect signal. |
| U042708 | - | Implausible data were received from the electronic ignition lock. There is a signal fault or the message is faulty. |
| U042908 | - | This error code can be ignored and erased. |
| U044708 | - | Implausible data were received from the central gateway. There is a signal fault or the message is faulty. |
| U046686 | - | This error code can be ignored and erased. |
| U046908 | - | Implausible data were received from the starter or alternator. There is a signal fault or the message is faulty. |
| U059308 | - | This error code can be ignored and erased. |
| U059508 | - | There is a signal fault or the message is faulty. |
| U104188 | - | Communication with the engine CAN bus has a malfunction. Bus OFF |
| U104787 | - | Communication with the oil sensor has a malfunction. The message is missing. |
| U111029 | - | The vehicle speed signal was not received. There is an invalid signal. |
| U11A687 | - | Communication with control unit 'Radar sensorics' has a malfunction. The message is missing. |
| U11BE87 | - | This error code can be ignored and erased. |
| U120087 | - | This error code can be ignored and erased. |
| U120187 | - | This error code can be ignored and erased. |
| U14038F | - | This error code can be ignored and erased. |
| U140781 | - | Implausible signal ""Engine torque"" was received. Incorrect data were received. |
| U140786 | - | This error code can be ignored and erased. |
| U140787 | - | This error code can be ignored and erased. |
| U140D29 | - | This error code can be ignored and erased. |
| U144408 | - | Implausible data were received from control unit 'Radar sensorics'. There is a signal fault or the message is faulty. |
| U145400 | - | This error code can be ignored and erased. |
| U145700 | - | The signal 'Fuel level' from the rear signal acquisition and actuation module was not received by the instrument cluster. |
| U14572A | - | The signal 'Fuel level' from the rear signal acquisition and actuation module was not received by the instrument cluster. There is no signal change. |
| U151200 | - | This error code can be ignored and erased. |
| U151300 | - | This error code can be ignored and erased. |
| U151307 | - | This error code can be ignored and erased. |
| U151400 | - | This error code can be ignored and erased. |
| U187661 | - | This error code can be ignored and erased. |
| U187662 | - | This error code can be ignored and erased. |
| U187664 | - | This error code can be ignored and erased. |
| U187668 | - | This error code can be ignored and erased. |
| U300316 | - | This error code can be ignored and erased. |
| U300317 | - | This error code can be ignored and erased. |
| U300E00 | - | This error code can be ignored and erased. |
| U301100 | - | This error code can be ignored and erased. |