Accelerator Pedal Sensor, Basic Function - GF30.20-P-2000A
WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2023 Mercedes-Benz CLA45 AMG, 2023 Mercedes-Benz CLA35 AMG, 2023 Mercedes-Benz CLA250, 2022 Mercedes-Benz CLA45 AMG, and 2022 Mercedes-Benz CLA35 AMG. However, it is still accessible from the selected car via links, so may be relevant.
Model All (4xWD, CAR)
Example of accelerator pedal sensor
Overview
This document contains information on:
- General
- Function
- Limp-home mode
General
The accelerator pedal sensor (1) converts the mechanical actuation of the accelerator pedal into a voltage signal that corresponds to the accelerator pedal position.
Function
The accelerator pedal sensor (1) is integrated on the accelerator pedal pivot. The accelerator pedal sensor (1) consists of a shaft with ring magnet. The ring magnet rotates in a printed circuit board with stator in two fixed Hall elements.
This produces a change in the voltage.
Limp-home mode
If the signal voltage of a Hall element fails, the signal voltage of the second Hall element is used and the engine enters limp-home mode.
| Component descriptions | |||
| Accelerator pedal module, component description | Model 223 | GF30.20-P-0001A | |
| Model 206 | GF30.20-P-0001C | ||
| Model 297 | GF30.20-P-0001D | ||
| Model 295 | GF30.20-P-0001E | ||
| Model 232 | GF30.20-P-0001F | ||
| Model 296 | GF30.20-P-0001G | ||
| Model 254 | GF30.20-P-0001 H | ||
| Model 464 | GF30.20-P-0001J | ||
| Model 214 | GF30.20-P-0001 K | ||
| Model 294 | GF30.20-P-0001 N | ||
| Model 192 | GF30.20-P-0001 R | ||
| Accelerator pedal switch, component description | Model 243 | GF30.20-P-1000B | |
| Component description for the accelerator pedal sensor | Model 243 | GF30.20-P-2011B | |
| Model 118, 177, 247 as of model year 2023 | GF30.20-P-2011L | ||
| Model 167 as of model year 2023 |
GF30.20-P-2011M |