LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mercury >> 1993 >> Capri Base, Automatic >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Wiper/Washer Systems >> Testing >> Interval Wipe Module Test
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Interval Wipe Module Test

  1. Check WIPER fuse in interior fuse block and replace if necessary. Perform WIPER/WASHER SWITCH TEST. Access interval wipe module connector. Interval wipe module is located below instrument panel, near console. Ensure wiper switch is in OFF position.
  2. Turn ignition on and measure voltage at Blue/White and Blue/Black wires of module connector. Battery voltage should not be present. Turn wiper switch to LOW position. Measure voltage at Blue/White and Blue/Black wires of module connector. Battery voltage should be present.
  3. Turn wiper switch to HIGH position. Measure voltage at Blue/White, Blue/Black and Blue/Red wires of module connector. Battery voltage should be present. Turn wiper switch to INT position. Measure voltage at Blue/White and Blue/Black wires of module connector. Battery voltage should be present during each cycle. If module does not perform as specified, replace module.
scientia non olet · About LEMON Manuals