Check Wire Continuity
Locate remote control mirror motor connectors. Check voltages at remote control mirror motors as shown in SWITCH POSITION VOLTAGES (MOTOR CONNECTOR) table, while moving switch. If voltages are correct, replace control mirror motor(s). If voltages are not correct, service wire(s) with incorrect value.
SWITCH POSITION VOLTAGES
| Switch Position | Wire Color | Volts |
|---|---|---|
| Left Mirror Up | LT GRN/YEL | 12 |
| " | BRN | 0 |
| Left Mirror Down | LT/GRN/YEL | 0 |
| " | BRN | 12 |
| Left Mirror Left | BRN/YEL | 12 |
| " | BRN | 0 |
| Left Mirror Right | BRN/YEL | 0 |
| " | BRN | 12 |
| Right Mirror Up | LT GRN/BLK | 12 |
| " | BRN | 0 |
| Right Mirror Down | LT GRN/BLK | 0 |
| " | BRN | 12 |
| Right Mirror Left | BRN/BLK | 12 |
| " | BRN | 0 |
| Right Mirror Right | BRN/BLK | 0 |
| " | BRN | 12 |