Memory Set Switch: Removal
WARNING: This page is about a different car, the 2002 Chrysler Town & Country. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect and isolate the battery negative cable.
- Remove the front door trim panel switch bezel from the driver side front door. Using a thin flat-blade pry tool, gently pry the switch bezel away from the drivers door trim panel.
- Disconnect the memory switch wire harness connector from the memory switch.
- Remove the 2 screws that secure the memory switch to the back of the driver side front door trim panel switch bezel.
- Remove the memory switch.