LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mercury >> 1993 >> Villager LS >> Repair and Diagnosis >> External Pages >> Different car >> Section 383 (Electronic Control Modules) >> Sliding Door Control Module >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Sliding Door Control Module: Installation

WARNING: This page is about a different car, the 2004 Dodge Grand Caravan, 2004 Dodge Caravan, and 2004 Chrysler Town & Country. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the control module and install the retaining screw.
  2. Connect the control module electrical connectors. Slide the locking tab into the locked position.
  3. Install the appropriate door trim panel on the vehicle. Refer to TRIM PANEL for the procedure.
  4. Install the weather shield. Refer to SLIDING DOOR WEATHERSTRIP for the procedure.
  5. Connect the negative battery cable.
  6. Using an appropriate scan tool, check and erase any power door control module diagnostic trouble codes.
  7. Verify power door system operation. Cycle the power door through one complete open and close cycle.