Throttle Control Cable: Installation
WARNING: This page is about a different car, the 2004 Dodge Grand Caravan, 2004 Dodge Caravan, and 2004 Chrysler Town & Country. However, it is still accessible from the selected car via links, so may be relevant.
- From the engine compartment, push the housing end fitting and grommet into the dash panel. Install gromment into the dash panel,
- Install the cable housing (throttle body end) into the cable mounting bracket on the engine.
- From inside the vehicle, hold up the pedal and install throttle cable and cable retainer in the upper end of the pedal shaft.
- At the dash panel, install the cable retainer clip between the end of the throttle cable fitting and grommet
- From the engine compartment, rotate the throttle lever wide open and install the throttle cable.