Compass/Mini-Trip Computer: Installation
WARNING: This page is about a different car, the 2004 Dodge Grand Caravan, 2004 Dodge Caravan, and 2004 Chrysler Town & Country. However, it is still accessible from the selected car via links, so may be relevant.
- Position the compass mini-trip computer module in the overhead console.
- Install the ten screws holding the compass mini-trip computer module in the overhead console.
- Install the overhead console (Refer to INSTALLATION ).
- Connect the battery negative cable.
NOTE:
If a new EVIC module has been installed, the compass will have to be calibrated and the variance set. Refer to STANDARD PROCEDURE - COMPASS VARIATION ADJUSTMENT
and STANDARD PROCEDURE - COMPASS CALIBRATION
.