Fuel Injection - Diesel: Sensor-Temperature/Pressure-Map: Installation
WARNING: This page is about a different car, the 2005 Dodge Pickup and 2005 Dodge Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
- Check condition of sensor o-ring.
- Lubricate sensor o-ring with clean engine oil.
- Clean sensor mounting area at intake manifold.
- Position sensor into intake manifold.
- Install and tighten 2 sensor mounting screws to 1 N.m (9 in. lbs.) torque.
- Connect electrical connector to sensor.