Battery Temperature Sensor: Installation

WARNING: This page is about a different car, the 2005 Dodge Pickup and 2005 Dodge Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: The battery temperature sensor (1) is located under the vehicle battery and is attached (snapped into) a mounting hole on battery tray (4).

Pull electrical connector (3) up through mounting hole in top of battery tray.
Connect sensor.
Snap sensor into battery tray.
Install battery. Refer to BATTERY SYSTEM for procedures.

Fig 1: Battery Temperature Sensor Location
Courtesy of DAIMLERCHRYSLER CORP.