Specifications Index
VILLAGER SPECIFICATIONS INDEX
| System | Specification/Procedure | |
|---|---|---|
| Air Conditioning - Automatic System | ||
| Service | SPECIFICATIONS | |
| Torque | TORQUE SPECIFICATIONS | |
| Air Conditioning - Manual System | ||
| Service | SPECIFICATIONS | |
| Torque | TORQUE SPECIFICATIONS | |
| Axle Nut/Hub Nut | 145-209 Ft. Lbs. (196-284 N.m) | |
| Brakes | ||
| Bleeding Sequence | BLEEDING BRAKE SYSTEM | |
| Disc Brakes | DISC BRAKE SPECIFICATIONS | |
| Drum Brakes | DRUM BRAKE SPECIFICATIONS | |
| Torque | TORQUE SPECIFICATIONS | |
| Charging | ||
| Generator | ON-VEHICLE TESTING | |
| Torque | TORQUE SPECIFICATIONS | |
| Drive Belts | ||
| Adjustment | BELT ADJUSTMENT | |
| Belt Routing | DRIVE BELT ROUTING | |
| Engine Cooling | ||
| General Service Specifications | COOLING SYSTEM SPECIFICATIONS | |
| Radiator Cap Pressure | 12-16 psi | |
| Water Pump R & I | WATER PUMP | |
| Engine Mechanical | ||
| Compression | ENGINE COMPRESSION | |
| Oil Pressure | Check the oil pressure with the engine running under no load. The approximate discharge pressure should be more than 59 kPa (9 psi) at idle, and 412-451 kPa (60-65 psi) at 3200 rpm. | |
| Overhaul | ENGINE SPECIFICATIONS | |
| Torque | TORQUE SPECIFICATIONS | |
| Fluid Specifications | See FLUIDS under MAINTENANCE tab. From within Manager or Service Writer, click the "30/60/90 Interval" or "Maint." button. | |
| Flywheel/Flex Plate Torque | 65 Ft. Lbs. (88 N.m) | |
| Fuel System | ||
| Fuel Filter Location | Under vehicle behind fuel filter splash shield, mounted in bracket. | |
| Fuel Filter R & I | FUEL FILTER REMOVAL & INSTALLATION - VILLAGER | |
| Pressure Release Procedure | FUEL PRESSURE RELEASE | |
| Pressure Specification | FUEL PRESSURE -- CARS | |
| Fuel Pressure Test Procedure | FUEL PRESSURE | |
| Ignition | ||
| Firing Order & Cylinder Identification | FIRING ORDER & CYLINDER IDENTIFICATION | |
| Ignition Wires (Resistance) | HIGH TENSION WIRE RESISTANCE | |
| Spark Plugs | ||
| Type | Motorcraft No. AGSP-32FP | |
| Gap | .039-.043 In. (1.00-1.10 mm) | |
| Torque | 18 Ft. Lbs. (25 N.m) | |
| Starting | ||
| Starter | NA | |
| Torque | TORQUE SPECIFICATIONS | |
| Wheel Alignment | ||
| Adjustment Specifications | WHEEL ALIGNMENT SPECIFICATIONS | |
| Torque | TORQUE SPECIFICATIONS | |
| Wheel & Tire | ||
| Wheel Lug Nut Torque | 80 Ft. Lbs. (108 N.m) | |