Transaxle Specifications
TRANSAXLE SPECIFICATIONS
| Application | In. (mm) | |||||
|---|---|---|---|---|---|---|
| Clutch Pack Clearances | ||||||
| Coasting Clutch | .028-.043 (.70-1.10) | |||||
| Forward Clutch | .018-.033 (.45-.85) | |||||
| Low/Reverse Clutch | .067-.083 (1.70-2.10) | |||||
| Reverse Clutch | .021-.031 (.50-.80) | |||||
| 3-4 Clutch | .071-.087 (1.80-2.20) | |||||
| End Play | ||||||
| Output Shaft | 0-.006 (0-.15) | |||||
| Reverse Clutch Drum | .022-.035 (.55-.90) | |||||
| Torque Converter | .061 (1.55) | |||||
| Total | .010-.022 (.25-.55) | |||||
| Forward & Coasting Clutch Dish Plate Height | .106 (2.70) | |||||
| Friction Disc Thickness (Wear Limit) | ||||||
| Forward/Coast Clutch | .055 (1.40) | |||||
| Low/Reverse Clutch | .063 (1.60) | |||||
| Reverse Clutch | .055 (1.40) | |||||
| 3-4 Clutch | .055 (1.40) | |||||
| Idler Gear Turning Torque | (1) 2 (.20) | |||||
| Oil Pump Clearances | ||||||
| Oil Pump Gear | .001-.002 (.03-.05) | |||||
| Oil Pump Sealing Ring | .001-.007 (.04-.18) | |||||
| Outer Gear-To-Housing (2) | .004-.007 (.11-.18) | |||||
| Reverse Clutch Dish Plate Height | .121 (3.08) | |||||
| 3-4 Clutch Drum Sealing Ring Clearance | .003-.009 (.08-.23) | |||||
|
||||||