General Specifications
GENERAL SPECIFICATIONS
| Item | Specification |
|---|---|
| Fluid | |
| MERCON® V is not interchangeable at this time with the current MERCON® service fluids. Check the transmission dipstick to determine the correct fluid and refer to owner publication to determine the correct service interval for the specific vehicle. | |
| Motorcraft MERCON® V Automatic Transmission Fluid XT-5-QM | MERCON® V |
| Fluid Capacities | |
| All | 12.1L (12.8 quarts) |
| Lubricants | |
| Multi-Purpose Grease ESR-M1C159-A | XL -5 |
GENERAL SPECIFICATIONS
| Item | Specification |
|---|---|
| Selective Thrust Washer - No. 1 | |
| Green thickness mm (inch) | 1.217-1.371 (0.050-0.054) |
| Yellow thickness mm (inch) | 1.727-1.828 (0.068-0.072) |
| Natural thickness mm (inch) | 2.159-2.260 (0.085-0.089) |
| Red thickness mm (inch) | 2.590-2.692 (0.102-0.106) |
| Blue thickness mm (inch) | 3.022-3.124 (0.119-0.123) |
| Forward Clutch Pack | |
| Clearance mm (inch) | 1.17-1.63 (0.046-0.068) |
| Snap ring thickness mm (inch) | 1.524-1.625 (0.060-0.064) |
| Snap ring thickness mm (inch) | 1.880-1.981 (0.074-0.078) |
| Snap ring thickness mm (inch) | 2.235-2.337 (0.088-0.092) |
| Snap ring thickness mm (inch) | 2.591-2.692 (0.102-0.106) |
| Reverse Clutch Pack | |
| Clearance mm (inch) | 1.27-1.94 (0.050-0.076) |
| Snap ring thickness mm (inch) | 1.524-1.625 (0.060-0.064) |
| Snap ring thickness mm (inch) | 1.880-1.981 (0.074-0.078) |
| Snap ring thickness mm (inch) | 2.235-2.337 (0.088-0.092) |
| Snap ring thickness mm (inch) | 2.591-2.692 (0.102-0.106) |
| Direct Clutch Pack | |
| Clearance mm (inch) | 1.574-2.159 (0.062-0.85) |
| Snap ring thickness mm (inch) | 1.270-1.372 (0.050-0.054) |
| Snap ring thickness mm (inch) | 1.625-1.727 (0.064-0.068) |
| Snap ring thickness mm (inch) | 1.981-2.083 (0.078-0.082) |
| Snap ring thickness mm (inch) | 2.337-2.438 (0.092-0.096) |
| Intermediate Clutch Pack | |
| Clearance mm (inch) | 41.7322-42.5958 (1.643-1.677) |
| Selective steel plates mm (inch) | 1.702-1.803 (0.067-0.071) |
| Selective steel plates mm (inch) | 1.956-2.057 (0.077-0.081) |
| Selective steel plates mm (inch) | 2.210-2.311 (0.087-0.091) |
| Selective steel plates mm (inch) | 2.464-2.565 (0.097-0.101) |