LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mercury >> 2005 >> Montego Base, AWD >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission - CVT >> In-Vehicle Repair >> Transaxle Support Insulator >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Transaxle Support Insulator: Removal

  1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to JACKING & LIFTING .
  2. Remove the 2 bolts for the rear transaxle mount.
    Fig 1: Identifying Bolts For Rear Transaxle Mount
    G03990748Courtesy of FORD MOTOR CO.
  3. Install a suitable transmission jack to support the transaxle.
  4. Remove the upper transaxle mount bolts and remove the mount.
    Fig 2: Removing Upper Transaxle Mount Bolts
    G03990282Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals