LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mercury >> 2005 >> Mountaineer 4.0 K, AWD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Acceleration Control System >> Removal And Installation >> Accelerator Pedal - Fixed >> Removal and Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal and Installation

  1. Disconnect the battery ground cable. For additional information, refer to BATTERY, MOUNTING AND CABLES .
  2. Disconnect the accelerator pedal electrical connector.
  3. Remove the nuts and the accelerator pedal assembly.
    • To install, tighten to 7 Nm (62 lb-in).
  4. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals