LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mercury >> 2007 >> Montego Base, FWD >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine >> In-Vehicle Servicing >> Oil Pump >> Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Oil Pump: Installation

  1. Position the oil pump and install the bolts.
    • Tighten in the sequence shown to 10 Nm (89 lb-in).
    2. Fig 1: Identifying Tightening Sequence Of Oil Pump Bolts
    GF0017071Courtesy of FORD MOTOR CO.
  2. Install the oil pump screen and pickup tube. For additional information, refer to Engine Lubrication Components - Exploded View  and Oil Pump Screen and Pickup Tube .
  3. Install the timing drive components. For additional information, refer to Timing Drive Components .
scientia non olet · About LEMON Manuals