Removal And Installation
- With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to JACKING AND LIFTING article.
- Disconnect the exhaust gas recirculation (EGR) system module-to-exhaust manifold tube upper nut.
- To install, tighten to 40 Nm (30 lb-ft).
- Disconnect the EGR system module-to-exhaust manifold tube lower nut and remove the EGR system module-to-exhaust manifold tube.
- To install, tighten to 40 Nm (30 lb-ft).
- To install, reverse the removal procedure.