Disassembly And Assembly
| Item | Part Number | Description |
|---|---|---|
| 1 | 611A08 | Head restraint assembly |
| 2 | 610A16 | Head restraint guide |
| 3 | 610A16 | Head restraint guide |
| 4 | - | Backrest frame |
| 5 | - | Pull strap |
| 6 | - | Backrest foam pad |
| 7 | 66601 | Backrest trim cover |
| 8 | - | Bushing |
| Item | Part Number | Description |
|---|---|---|
| 1 | 611A08 | Head restraint assembly |
| 2 | 66601 | Backrest trim cover |
| 3 | - | Backrest foam pad |
| 4 | 610A16 | Head restraint guide |
| 5 | 610A16 | Head restraint guide |
| 6 | 61018 | Backrest frame |
| 7 | - | Pull strap |
- Remove the affected third row backrest. For additional information, refer to Seat Backrest - Third Row, Bench or Seat Backrest - Third Row, 50 Percent .
- Remove the head restraint(s).
- Release the hook-and-loop strips, invert the trim cover and remove the hog rings.
- Remove the head restraint guides.
- For bench seats, remove 4 head restraint guides.
- For 50/50 seats, remove 2 head restraint guides.
- Remove the backrest trim cover.
- Pull the strap through the trim cover.
- Remove the backrest foam pad.
- For 50 percent backrest, remove the bushing.
- To assemble, reverse the disassembly procedure.
CAUTION:
Use care when separating the seat back trim cover from the hook-and-loop strip, or the hook-and-loop strip may be torn from the seat back foam.