Section 1260 (Driveline System - General Information): Specifications: Material
WARNING: This page is about a different car, the 2009 Ford Mustang. However, it is still accessible from the selected car via links, so may be relevant.
Material
| Item | Specification | Fill Capacity |
|---|---|---|
| Additive Friction Modifier XL-3 (US); CXL-3 (Canada) |
EST-M2C118-A | 118 ml (4 oz.) |
| Motorcraft SAE 75W-140 Synthetic Rear Axle Lubricant XY-75W140-QL (US); CXY-75W140-1L (Canada) |
WSL-M2C192-A | 8.8-in rear axlea |
| Motorcraft SAE 80W-90 Premium Rear Axle Lubricant XY-80W90-QL (US); CXY-80W90-1L (Canada) |
WSP-M2C197-A | 7.5-in rear axleb |
| Premium Long-Life Grease XG-1-C or XG-1-K (US); CXG-1-C (Canada) |
ESA-M1C75-B | - |
a Service refill capacities are determined by filling the axle to the bottom of the filler hole. The vehicle must be on a level surface.
b Service refill capacities are determined by filling the axle 11.1-12.7 mm (0.4375-0.515 in) below the bottom of the filler hole. The vehicle must be on a level surface.