Spring Lock Couplings: Connect

WARNING: This page is about a different car, the 2009 Ford Mustang. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Lubricate the tube fitting with clean engine oil.

Align and push the spring lock coupling onto the tube fitting until fully seated.

Fig 1: Aligning & Pushing Spring Lock Coupling Onto Tube Until You Hear A Click

Courtesy of FORD MOTOR CO.

Pull on the coupling to make sure it is fully engaged.
If equipped, install the fuel tube safety clip.

Fig 2: Installing Fuel Tube Safety Clip

Courtesy of FORD MOTOR CO.

Connect the battery ground cable. For additional information, refer to BATTERY, MOUNTING AND CABLES article.