Removal and Installation
WARNING: This page is about a different car, the 2011 Mercury Milan, 2011 Lincoln MKZ, and 2011 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the passenger air bag module. For additional information, refer to SUPPLEMENTAL RESTRAINT SYSTEM -- FUSION, MILAN & MKZ article.
- Remove the 2 bolts and the Interior Lighting Control Module (ILCM).
- To install, tighten to 1.6 Nm (14 lb-in).
- To install, reverse the removal procedure.