LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mercury >> 2010 >> Mountaineer 4.6 8, AWD >> Repair and Diagnosis >> Accessories & Equipment >> Communication Devices >> Module Configuration System >> Diagnosis And Testing >> Module Configuration >> Principles of Operation >> Definition of Terms >> As-Built Data
April 5, 2026: LEMON Manuals is launched! Read the announcement.

As-Built Data

As-Built data is a VIN  -specific module configuration record. During vehicle build, the configuration from all modules is downloaded and stored in the As-Built database. As-Built data does not reflect customer preference items that have been changed from the default state. These items need to be changed using programmable parameters after the module is configured.

NOTE: It is not necessary to obtain As-Built data unless directed to do so by the scan tool. This data may be accessed from the technician service publication website.

The following chart lists As-Built data addresses and describes specific module configuration information:

Module Configuration and Parameter Chart 

MODULE CONFIGURATION AND PARAMETER CHART

Module Module Address Requires PMI  Reprogram/Flash Capable Requires Adaptive Learning or Calibration Available Programmable Parameters
4X4 control module 761 No Yes No None
ABS module 760 Yes Yes
  • IVD (stability control) initialization
None
Accessory Protocol Interface Module (APIM) 7D0 Yes Yes No
  • Global Positioning System (GPS) information
  • Stereo in pass-through
Audio Control Module (ACM) 727 Yes Yes No
  • Satellite Digital Audio Receiver System (SDARS) module (except navigation)
  • Phone module (except navigation)
Driver Seat Module (DSM) 744 Yes Yes No
  • Easy entry/exit
  • Memory pedals
  • Memory recline
Global Positioning System Module (GPSM) 701 No No No None
HVAC module 733 Yes Yes No None
Instrument Cluster (IC) 720 Yes Yes No
  • Autolocks
  • Auto-unlock
  • Belt-Minder® (except Explorer Sport Trac)
  • Default language
  • Oil life threshold
Occupant Classification System Module (OCSM) 765 No Yes
  • Seat weight sensor re-zero
None
Parking Aid Module (PAM) - Explorer 736 No No No None
PAM - Mountaineer, Explorer Sport Trac 736 Yes No No None
PCM 7E0 Yes Yes
  • Adaptive airflow
  • Idle speed
  • Refueling event
  • Fuel trim
  • Speed control enable/disable
  • Axle ratio
  • Tire size
  • 4X4 low range input
Power Running Board (PRB) module 766 No Yes No None
Rear Entertainment Module (RETM) 771 Yes Yes No
  • Brand
  • Language
  • SDARS  module
Restraints Control Module (RCM) 737 Yes Yes
  • Seat weight sensor re-zero
  • Emergency call present
  • Belt-Minder® (driver) enable
  • Belt-Minder® (passenger) enable
Satellite Digital Audio Receiver System (SDARS) module 782 Yes Yes No None
Smart Junction Box (SJB) 726 Yes Yes
  • Tire Pressure Monitoring System (TPMS) sensor training
  • Autolocks
  • Auto-unlock
  • Daytime Running Lamps (DRL) (Explorer Sport Trac only)
  • Trim switch inhibit
  • Tri-color stop lamps (Explorer Sport Trac only)
Transmission Control Module (TCM) 7E1 No Yes Yes None