Component testing procedure
WARNING: This page is about a different variant/trim than selected.
MAIN LIGHT SWITCH - COMPONENT TESTING
| Circuit to test | Connect self-powered test light or ohmmeter to terminals | Move switch to these positions | A good switch will indicate |
|---|---|---|---|
| Headlamp circuit | 3 and 7 | Off | Open circuit |
| Park | Open circuit | ||
| Low | Closed circuit | ||
| Auto | Open circuit | ||
| Autolamp circuit | 3 and 4 | Off | Open circuit |
| Park | Open circuit | ||
| Low | Open circuit | ||
| Auto | Closed circuit | ||
| Parking lamps | 3 and 2 | Off | Open circuit |
| Park | Closed circuit | ||
| Low | Open circuit | ||
| Auto | Open circuit | ||
| Fog lamps | 3 and 5 | Off | Open circuit |
| Fog lamps | Closed circuit | ||
| Off | 3 and 6 | Off | Closed circuit |
| Park | Open circuit | ||
| Low | Open circuit | ||
| Auto | Open circuit |