On-board Monitor
The ON-BOARD MONITOR VERSION information will appear as follows:
- SW level:
- HW level:
- DIAG index:
- BUS index:
- Encoding index:
- Supplier
Selecting FUNCTIONS causes pop-up menu to appear allowing the selection of:
FUNCTIONS DESCRIPTION
|
This displays the ON-BOARD MONITOR VERSION screen as described above. |
|
This allows each key, including the rotary control knob, on the display unit control panel to be checked for correct operation. Each key is allocated a letter or number, which is displayed when pressed or turned. The screen display shows FF if no key is pressed, FEH if multiple keys are pressed: |
|
This enables the brightness of the display to be adjusted via a slider control on the screen that is controlled with the rotary control knob. Rotation in either direction will brighten or darken the LCD screen in a range from -10 to +10. Pressing the rotary control knob will select the chosen setting. |
Access to these functions is possible using the rotary control knob.
Selecting FUNCTIONS will return to the pop-up menu or selecting < RETURN will return to the Service Mode menu.