61 31 134 Removing and installing/replacing USB/audio interface connecting socket

WARNING: This page is about a different car, the 2010 BMW 550i, 2009 BMW 550i, and 2008 BMW 550i. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove trim for storage tray . See 51 16 211 REMOVING AND INSTALLING/REPLACING FINISHER FOR STORAGE TRAY .

Insert suitable screwdriver (1) through opening (2) in direction of arrow.

NOTE: Protect connecting socket wiring harness against being damaged by screwdriver (1).

Press against connecting socket (3) in lower area.

Remove connecting socket (3) in direction of arrow.

Fig 1: Identifying Connecting Socket, Screwdriver And Opening

Courtesy of BMW OF NORTH AMERICA, INC.

Disconnect plug connection (1).

Installation:

Retaining lug (3) must not be damaged.
Make sure connecting socket (2) is correctly seated in storage compartment (4).

Fig 2: Identifying Connecting Socket, Lug And Storage Compartment
Courtesy of BMW OF NORTH AMERICA, INC.