LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mini >> 2012 >> Cooper Base, 2D Convertible, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 10 (Specifications & Procedures) >> Wheel Alignment Procedures >> Toe-In Adjustment >> Front (E52)
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Front (E52)

WARNING: This page does not describe the selected car, but rather 127 other vehicles, including the 2006 BMW M3, 2006 BMW 330Ci, 2006 BMW 325Ci, 2005 BMW M3, and 2005 BMW 330xi. However, it is still accessible from the selected car via links, so may be relevant.
  1. Move steering wheel gear into straight ahead setting. Marks on housing and steering shaft must line up. See Fig 1.
  2. Slacken lock nut (1) on steering tie rod, gripping outer tie rod in so doing. Adjust wheel toe-in by turning tie rod (2). See Fig 2. Adjust wheel toe-in to specification. See E52  under WHEEL ALIGNMENT SPECIFICATIONS.
  3. Grip outer tie rod and tighten lock nut to specification. See E52  under TORQUE SPECIFICATIONS.
Fig 1: Locating Mark On Housing & Steering Shaft
G00148285Courtesy of BMW OF NORTH AMERICA, INC.
Fig 2: Adjusting Wheel Toe-In
G00148286Courtesy of BMW OF NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals