13 62 531 Replacing Coolant Temperature Sensor (S85): Notes
WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2010 BMW M6, 2010 BMW M5, 2009 BMW M6, 2009 BMW M5, and 2008 BMW M6. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
Danger of scalding!
Only perform these tasks on an engine that has cooled down.
Only perform these tasks on an engine that has cooled down.
Necessary preliminary tasks:
- Read out fault memory of DME control unit; if necessary, work through test schedules
- Switch off ignition
- Remove intake air manifold. See 11 61 050 REMOVING AND INSTALLING AIR INTAKE MANIFOLD (S85) .
- Release cable duct in V-chamber, unlock plug connections and disconnect, slide cable duct to one side