32 00... Test conditions for chassis/wheel alignment check
WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2010 BMW M6, 2010 BMW 650i, 2009 BMW M6, 2009 BMW 650i, and 2008 BMW M6. However, it is still accessible from the selected car via links, so may be relevant.
Observe the following test conditions prior to the chassis/wheel alignment check:
- Correct and identical rim and tire sizes.
- Correct tread depth. The tread depth for each axle may differ from left to right by max. 3-4 mm.
- Correct tire inflation pressure (see instruction plate on car).
- Wheel bearing clearance OK
- Steering backlash OK
- Condition of suspension and shock absorbers OK
- Cars with ride level control: Pull fuse of air supply unit so that there is no controlling down or up.