31 00 ... Notes On Repairing Threads

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2008 BMW 750i, 2008 BMW 750Li, 2007 BMW 750i, 2007 BMW 750Li, and 2006 BMW 750i. However, it is still accessible from the selected car via links, so may be relevant.

IMPORTANT: Install Heli-coil thread inserts so that they are flush with the original thread.

NOTE: Damaged threads in engine carrier may be repaired with Heli-coil thread inserts. Comply with the procedure described in the example.

Fig 1: Identifying Damaged Heli-coil Thread

Courtesy of BMW OF NORTH AMERICA, INC.

Procedure:

Create a clean core hole; if necessary, drill out screw remnants

Fig 2: Drilling Core Hole
Courtesy of BMW OF NORTH AMERICA, INC.
Create locating thread for Heli-coil thread insert

Fig 3: Locating Thread For Heli-coil Thread
Courtesy of BMW OF NORTH AMERICA, INC.
Pick out Heli-coil thread insert in accordance with the table and screw into the locating thread until flush with the original thread

Fig 4: Identifying Heli-coil Thread
Courtesy of BMW OF NORTH AMERICA, INC.
Break drive pin and remove

Fig 5: Identifying Drive Pin
Courtesy of BMW OF NORTH AMERICA, INC.