86 21... Replacing Inside Light Power Cable
WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2010 BMW 535xi, 2010 BMW 535i, 2009 BMW 535xi, 2009 BMW 535i, and 2008 BMW 750i. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Remove inside light cover and lamp housing, refer to REPLACING INSIDE LIGHT .
Remove inside light plug, refer to REMOVING PLUG FOR INSIDE LIGHT .
Carefully remove adhesive bonds of power cable (1) from hood surface.
Installation:
Carefully remove traces of old adhesive with a scraper.
Use standard heat gun adhesive as adhesive.
Carefully remove adhesive bonds of power cable (1) from hood surface.
Installation:
Carefully remove traces of old adhesive with a scraper.
Use standard heat gun adhesive as adhesive.
Remove flat connectors (1). Strip cable ends (2) and connect to a new cable. Feed cable connection through opening (3).
Lay new power cable with old power cable through duct (1).