86 10... Disassembly of loading ramp frame/disassembly of rail, left/right
WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2010 BMW 535xi, 2010 BMW 535i, 2009 BMW 535xi, 2009 BMW 535i, and 2008 BMW 750i. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Two persons are required to disassemble the loading ramp frame.
Disassembly of license plate mounting plate refer to 86 10... DISASSEMBLY OF LICENSE PLATE
mounting plate.
Disassembly of pull rod refer to 86 10... DISASSEMBLY OF OVERRUNNING EQUIPMENT .
Disassembly of license plate mounting plate refer to 86 10... DISASSEMBLY OF LICENSE PLATE
mounting plate.
Disassembly of pull rod refer to 86 10... DISASSEMBLY OF OVERRUNNING EQUIPMENT .
Release screws (1) of loading ramp frame (2) on cross-strut (3).
Installation:
Tightening Torque: refer to 86 10 7AZ . See PLATFORM for specs.
Release screws (1, 2) on left and right sides of loading ramp frame (3).
Installation:
Use new self-locking nuts.
Tightening Torque: refer to 86 10 8AZ . See PLATFORM for specs.
Release screws (1, 2, 3).
Installation:
Use new self-locking nuts.
Tightening Torque: refer to 86 10 9AZ . See PLATFORM for specs.