86 10... Removing Entry Profile Section On Loading Ramp, Left, Right And Center

WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2010 BMW 535xi, 2010 BMW 535i, 2009 BMW 535xi, 2009 BMW 535i, and 2008 BMW 750i. However, it is still accessible from the selected car via links, so may be relevant.

CAUTION:

Before drilling out rivets, drive in rivet pins with a punch.

Drill out rivets (1). Remove entry profile section (2) towards front.

Fig 1: Identifying Rivets And Entry Profile Section

Courtesy of BMW OF NORTH AMERICA, INC.