86 10... Removing Outer Pull Rod Mount, Left And Right

WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2010 BMW 535xi, 2010 BMW 535i, 2009 BMW 535xi, 2009 BMW 535i, and 2008 BMW 750i. However, it is still accessible from the selected car via links, so may be relevant.

Release screws (1) and remove pull rod mount (2).

Installation:

Tightening Torque: refer to 86 10 30AZ . See PLATFORM for specs.

Fig 1: Identifying Screws And Pull Rod Mount

Courtesy of BMW OF NORTH AMERICA, INC.