April 5, 2026: LEMON Manuals is launched! Read the announcement.

86 10... Removing Wheel Bearing

WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2010 BMW 535xi, 2010 BMW 535i, 2009 BMW 535xi, 2009 BMW 535i, and 2008 BMW 750i. However, it is still accessible from the selected car via links, so may be relevant.

The angular-contact ball bearings do not require maintenance and have lifetime lubrication. The bearings cannot be readjusted.

Remove brake drum, refer to REMOVING BRAKE SHOES .

Lever out both snap rings (1).

Installation:

Replace expanded or damaged snap rings (1). Ensure correct seating.

Fig 1: Identifying Snap Rings

G04766409

Courtesy of BMW OF NORTH AMERICA, INC.

Press out wheel bearing with special tool 24 1 010 .

CAUTION:

Do not reuse old wheel bearing.

Fig 2: Identifying Special Tool (24 1 010)

G04766410

Courtesy of BMW OF NORTH AMERICA, INC.

Place new wheel bearing (1) with lathe-turned end (2) in center of bore in brake drum (3).

Installation:

Before pressing in new wheel bearing, check bearing seat for possible damage.

Make sure wheel bearing is not tilted when pressed in.

Fig 3: Identifying Wheel Bearing, Lathe-Turned End And Brake Drum

G04766411

Courtesy of BMW OF NORTH AMERICA, INC.

Press in new wheel bearing (1) with special tool 23 2 150 and 33 1 374 .

Fig 4: Identifying Special Tool (23 2 150, 33 1 374)

G04766412

Courtesy of BMW OF NORTH AMERICA, INC.