86 10... Replacing Holder For Chock

WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2010 BMW 535xi, 2010 BMW 535i, 2009 BMW 535xi, 2009 BMW 535i, and 2008 BMW 750i. However, it is still accessible from the selected car via links, so may be relevant.

Pull bar (1) down in direction of arrow A. Pull out chock (2) in direction of arrow B at an angle towards bottom.

Fig 1: Identifying Bar And Chock

Courtesy of BMW OF NORTH AMERICA, INC.

Release and unscrew cheese head tapping screws (1) on holder (2).

Fig 2: Identifying Head Tapping Screws And Holder

Courtesy of BMW OF NORTH AMERICA, INC.