86 21 ... Replacing Inside Light Power Cable
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2010 BMW X3, 2009 BMW X3, 2008 BMW X3, 2007 BMW X3, and 2006 BMW X3. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
.
Remove inside light cover and lamp housing,
refer to 86 21 ... REPLACING INSIDE LIGHT.
Remove inside light plug, refer to 86 21 ... REMOVING PLUG FOR INSIDE LIGHT
.
Carefully remove adhesive bonds of power cable (1) from hood surface.
Installation:
Carefully remove traces of old adhesive with a scraper. Use standard heat gun adhesive as adhesive.
Carefully remove adhesive bonds of power cable (1) from hood surface.
Installation:
Carefully remove traces of old adhesive with a scraper. Use standard heat gun adhesive as adhesive.
Remove flat connectors (1). Strip cable ends (2) and connect to a new cable. Feed cable connection through opening (3).
Lay new power cable with old power cable through duct (1).