61 35 795 Removing And Installing (Replacing) Control Unit For Adaptive Headlight

WARNING: This page is about a different car, the 2008 BMW Alpina and 2007 BMW Alpina. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove safety information module . See 65 77 700 REMOVING AND INSTALLING (REPLACING) SAFETY INFORMATION MODULE .

Unfasten plug connection (1) and disconnect.

Unlock catch (2) in direction of arrow.

Pull control unit for adaptive headlight (3) out of equipment carrier (4) and remove.

Fig 1: Identifying Plug Connection, Catch And Headlight

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement:

Carry out programming/coding . See VEHICLE PROGRAMMING AND CODING .