61 35 125 Removing And Installing/Replacing Body Module
WARNING: This page is about a different car, the 2007 BMW 550i and 2006 BMW 550i. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT:
Read and comply with notes on PROTECTION AGAINST ELECTROSTATIC DAMAGE (ESD PROTECTION)
Necessary preliminary tasks:
- E60: Remove LUGGAGE COMPARTMENT TRIM ON SIDE PANEL ON RIGHT
- E61: Remove flap in luggage compartment panel on right
- Disconnect battery negative lead
- Remove TRIM FOR INSTRUMENT PANEL, BOTTOM LEFT
- Detach AIRBAG CONTROL UNIT WITH GATEWAY MODULE
NOTE:
Open glovebox.
Unclip pin (1) from retaining strap (2).
Unclip pin (1) from shock absorber (2).
Open rotary clips (1) and remove.
Remove cover (2) in direction of arrow.
Release screws (1).
Pull fuse holder (2) back slightly.
Unlock plug connections (1) and disconnect.
Unlock catches (3) in direction of arrow and remove body module (2) from equipment carrier (4).
Replacement:
Carry out PROGRAMMING/ CODING