61 35 685 Replacing rain/light solar sensor
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2010 BMW 528xi, 2010 BMW 528i, 2009 BMW 528xi, 2009 BMW 528i, and 2008 BMW 528xi. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT:
Read and comply with notes on PROTECTION AGAINST ELECTROSTATIC DAMAGE (ESD PROTECTION) .
Expand two-part mirror base cover (1) by pressing from below and detach.
Feed out two-part mirror base cover (1) and remove.
If necessary, remove INTERIOR REARVIEW MIRROR .
NOTE:
Catches of two-part mirror base cover (1) must not be damaged.
Disconnect plug connection (1).
Unlock metal spring (3) in direction of arrow.
Pull off solar rain/light sensor (2) from windscreen.
Installation:
Connect plug (1) only after fitting sensor.
Pull off protective cover from new solar rain/light sensor.
Align solar rain-light sensor (2) and press firmly on windscreen. Pay attention to mechanical coding (6).
Press metal spring (3) centrally to ensure that retaining element (5) engages correctly in both hooks (4).
Clean windscreen in area (A) of fastening element and remove residues of silicone.
Replacement:
- Carry out PROGRAMMING/CODING .
- Carry out INITIALIZATION .