31 00... Notes on repairing threads

WARNING: This page is about a different car, the 2010 BMW 528i, 2009 BMW 528i, and 2008 BMW 528i. However, it is still accessible from the selected car via links, so may be relevant.

IMPORTANT: Install Helicoil thread inserts so that they are flush with the original thread.

NOTE: Damaged threads in engine carrier may be repaired with Helicoil thread inserts. Comply with the procedure described in the example.

Fig 1: Identifying Helicoil Thread

Courtesy of BMW OF NORTH AMERICA, INC.

Procedure:

Create a clean core hole; if necessary, drill out screw remnants

Fig 2: Drilling Out Screw
Courtesy of BMW OF NORTH AMERICA, INC.
Create locating thread for Helicoil thread insert

Fig 3: Creating Thread For Helicoil Thread Insert
Courtesy of BMW OF NORTH AMERICA, INC.
Pick out Helicoil thread insert in accordance with the table and screw into the locating thread until flush with the original thread

Fig 4: Identifying Helicoil Thread
Courtesy of BMW OF NORTH AMERICA, INC.
Break drive pin and remove

Fig 5: Removing Drive Pin
Courtesy of BMW OF NORTH AMERICA, INC.