12 90 Control Unit Housing
WARNING: This page is about a different car, the 2010 BMW 550i, 2009 BMW 550i, and 2008 BMW 550i. However, it is still accessible from the selected car via links, so may be relevant.
CONTROL UNIT HOUSING - TIGHTENING TORQUE SPECIFICATION
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Assembly of upper and lower sections | E32 / E34 / E36 | 5 Nm | ||
| 2AZ Center section to body | E32 / E34 | 3 Nm | ||
| 3AZ Control unit holder in E box | E36 | 5 Nm | ||
| 4AZ Control unit box cover | E38 / E39 / E52 | 4 Nm | ||
| E46 | 6 Nm | |||
| E53 / E36/7 / E54 | 3 Nm | |||
| 5AZ Electronics box to firewall | E65 | Plastic screw | 6 Nm |