00 00... Microencapsulated screws
WARNING: This page is about a different car, the 2010 BMW 128i, 2009 BMW 128i, and 2008 BMW 128i. However, it is still accessible from the selected car via links, so may be relevant.
Screw locking is a means to preventing a screwed connection from being loosened by external influences.
After the screw has been coated with the adhesive, the adhesive remains inactive until it is activated by capsule breakage when the screw is inserted and then cures at room temperature.
Installation:
- Microencapsulated screws (Loctite) must be replaced and may not be reused
- Screw connection must be completed within 20 mins. (start of curing)
- Microencapsulated screws must not be retightened
- Thread of nut must be cleaned beforehand in event of repeated use